PS1 Powerstand Connections/Line Out/XLR

From Bose Portable PA Encyclopedia
Revision as of 15:28, 14 November 2006 by ST (talk | contribs) (→‎XLR Line Outs Channels 1 and 2)
Jump to: navigation, search

Line Outs (XLR balanced) for Channels 1 and 2

  • post trim (+4 dBu nominal)

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). This is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to daisy-chain PS1 Power Stand (Classic) / Model Is use a pad between the Systems, preferably the "end" of the cable (closest to the System receiving the signal).


PS1LineOutXLR.jpg


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=PS1_Powerstand_Connections/Line_Out/XLR&oldid=2900"