Difference between revisions of "Stereo Mixer to Mono L1®"
m (→Behringer Eurorack UB1222FX) |
m |
||
| Line 68: | Line 68: | ||
;Model 1S Analog Input | ;Model 1S Analog Input | ||
| − | {{#Click:Model_1S#Analog_Input|Image:Power Stand Analog Input 250.png|Model 1S Analog Input}} | + | {{#Click:Model_1S#Analog_Input|Image:Power Stand Analog Input 250.png|Model 1S Analog Input}} Start with the Input Trim set to '''3''' and adjust so that you get a solid green signal. Occasional flickers of amber are fine. |
;Model 1I Analog Input | ;Model 1I Analog Input | ||
| − | {{#Click:Model_II#Analog_Input|Image:Power Stand Analog Input 250.png|Model II Analog Input}} | + | {{#Click:Model_II#Analog_Input|Image:Power Stand Analog Input 250.png|Model II Analog Input}} Start with the Input Trim set to '''3''' and adjust so that you get a solid green signal. Occasional flickers of amber are fine. |
;Compact Channel 2 | ;Compact Channel 2 | ||
| − | {{#Click:L1®_Compact#Channel_2|Image:Compact Channel 2 Balanced.png|Model II Analog Input}} | + | {{#Click:L1®_Compact#Channel_2|Image:Compact Channel 2 Balanced.png|Model II Analog Input}} Start with the Input Trim set to '''3''' and adjust so that you get a solid green signal. Occasional flickers of amber are fine. |
| Line 84: | Line 84: | ||
#Run and the right side of the stereo source to the left side of another stereo channel. | #Run and the right side of the stereo source to the left side of another stereo channel. | ||
#Pan any other inputs hard left | #Pan any other inputs hard left | ||
| − | #Use the left output of mixer and connect that to the {{L1}} | + | #Use the left output of mixer and connect that to the {{L1}} Analog input. |
Here are a some examples of how you can get a mono output out of your stereo mixer. | Here are a some examples of how you can get a mono output out of your stereo mixer. | ||
Revision as of 13:17, 8 January 2015
Contents
Using a stereo mixer with an L1
Here are some examples of connecting a stereo mixer to the mono input on your L1 .
The inputs on the L1 Model 1S, L1 Model II, and the Compact Channel 2 are MONO. For best results do NOT use any kind of Y-adapter to connect stereo outputs from a mixer to a mono input on an L1 . See Why Not Wye for details.
If you have questions or comments about this article please post a note in the Bose Forum - Technical Questions.
- Model 1S Analog Input
{{#Click:Model_1S#Analog_Input|Image:Power Stand Analog Input 250.png|Model 1S Analog Input}} Start with the Input Trim set to 3 and adjust so that you get a solid green signal. Occasional flickers of amber are fine.
- Model 1I Analog Input
{{#Click:Model_II#Analog_Input|Image:Power Stand Analog Input 250.png|Model II Analog Input}} Start with the Input Trim set to 3 and adjust so that you get a solid green signal. Occasional flickers of amber are fine.
- Compact Channel 2
{{#Click:L1®_Compact#Channel_2|Image:Compact Channel 2 Balanced.png|Model II Analog Input}} Start with the Input Trim set to 3 and adjust so that you get a solid green signal. Occasional flickers of amber are fine.
It's pretty easy to make this work. You can pan all your inputs hard LEFT and take the LEFT output and connect that to your L1 . If you have a stereo source and two stereo channels, then you can
- Run the left side of the stereo source to the left input on one stereo channel,
- Run and the right side of the stereo source to the left side of another stereo channel.
- Pan any other inputs hard left
- Use the left output of mixer and connect that to the L1 Analog input.
Here are a some examples of how you can get a mono output out of your stereo mixer.
Behringer Eurorack UB1222FX
{{#Click:http://www.behringer.com/EN/Products/UB1222FX-PRO.aspx%7CImage:Behringer UBC1222FXPannedLeftMono.png|800px|Behringer Eurorack UB1222FX web page}}
Mackie 1402 VLZ4
{{#Click:http://www.mackie.com/products/vlz4-series-compact-mixers/downloads/%7CImage:Mackie1402VL4PannedLeftMono.png%7CMackie 1402VLZ4 web page}}
Yamaha MG10
{{#Click:http://usa.yamaha.com/products/live_sound/mixers/analog-mixers/mg_standard_model/mg10/?mode=model#tab=product_lineup%7CImage:YamahaMG10PanLeft.png%7CYamaha MG10 web page}}
