Difference between revisions of "T1 ToneMatch® Audio Engine"
m |
m |
||
| Line 5: | Line 5: | ||
<td valign="top">[[Image:005 Bose T1.gif|Bose T1™]] | <td valign="top">[[Image:005 Bose T1.gif|Bose T1™]] | ||
| − | ''' <big> | + | ''' <big>Downloads</big>''' |
| + | ** [[L1™ Model II Power Stand Firmware Updates]] - includes bug fixes | ||
| + | ** [[T1 ToneMatch™ Audio Engine Firmware Updates]] - includes bug fixes | ||
| + | |||
| + | * [[Presets/ToneMatch™/Downloads|ToneMatch™ Presets for the T1™]] | ||
| + | |||
[http://bose.infopop.cc/eve/forums/a/tpc/f/8221072574/m/5791097384 T1™ and L1™ Firmware] | [http://bose.infopop.cc/eve/forums/a/tpc/f/8221072574/m/5791097384 T1™ and L1™ Firmware] | ||
| Line 51: | Line 56: | ||
A really helpful feature on the T1 is to go to the Prefs/Output Level menu, and see where you are relative to maximum output. | A really helpful feature on the T1 is to go to the Prefs/Output Level menu, and see where you are relative to maximum output. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Line 119: | Line 95: | ||
[[Image:T12ModelI.png]] | [[Image:T12ModelI.png]] | ||
| + | |||
| + | == Preamps == | ||
| + | === Comparison to Model I and Classic === | ||
| + | |||
| + | MikeZ-at-Bose tells us:<ref>MikeZ-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3651093054?r=1711028154#1711028154 talks about the preamps in the L1 Model I and the T1™ ]</ref> | ||
| + | |||
| + | ... (the preamps on the Model I are)... exactly the same as the Classic. | ||
| + | |||
| + | On the {{T1}} they're different, but are designed to the same standard as the {{Classic}} preamps. | ||
| + | |||
| + | Functionally they are basically the same in terms of frequency response, input impedance, noise performance, max gains etc. | ||
| + | |||
| + | The difference comes in how we get there. I'll try not to go into horribly boring detail. The name of the game is trade offs, and in the end the design constraints dictate the *best* type of circuit used for *this* particular situation. Here are a couple of the many factors that dictate the differences: | ||
| + | |||
| + | Gain structure. The internal components of the {{T1}} are different that the {{Model I}} / {{Classic}} and need to have signals fed to them in certain ways. Different designs are more suited to the levels needed than others. | ||
| + | |||
| + | Physical layout of the circuit on the board. There are four channels in a tighter space in the {{T1}}. Again, certain designs lend themselves to be better at this than others. | ||
| + | |||
| + | After evaluating all of the factors that go into the design of a preamp we are using another proven circuit that relies more on discrete transistors rather than op-amps. It fits our needs better for this design situation. The preamp design itself is not necessarily any better or worse. There are *many* ways to skin the cat of preamp design to achieve a desired performance. | ||
| + | |||
| + | Will it sound different? No...I certainly cannot hear a difference playing through it. Can't measure one either. | ||
| + | |||
| + | Hope this sheds some light on it. | ||
| + | |||
| + | MikeZ<ref>MikeZ-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3651093054?r=1711028154#1711028154 talks about the preamps in the L1 Model I and the T1™ ]</ref> | ||
| + | |||
| + | === Preamps Out === | ||
| + | [[Image:T1PreampsOut.png|thumb|right|image of T1™ rear pointing to Preamps out]] | ||
| + | The preamp outputs are before everything except the Trim control in the signal chain. - MikeZ-at-Bose<ref>MikeZ-at-Bose -[http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/5891048364?r=3141068364#3141068364 T1™ Preamp Out Muting]</ref>. This means that these are post-trim, and nothing else (e.g. Muting) has any effect on the signal at the preamp outs. | ||
| + | |||
| + | |||
| + | === Presets === | ||
| + | * [[Presets/ToneMatch™/Downloads|ToneMatch™ Presets for the T1™]] (downloadable presets that are not installed at the factory) | ||
| + | * [[Presets (T1 ToneMatch)|T1 ToneMatch™ Presets]] (includes downloadable lists with cross-references to Version 2 presets). | ||
| + | |||
== USB (Computer Interface) == | == USB (Computer Interface) == | ||
Revision as of 06:06, 12 August 2007
Downloads
This is an online simulator that lets you interact with all the controls on the T1 ToneMatch Audio Engine |
Documentation
Aux Output
T1 ToneMatch™ Audio Engine/Aux
Effects
Overview from Hilmar-at-Bose
T1 ToneMatch™ Audio Engine/Effects
Detailed Listing
Please see Effects
Gain Staging
Bill-at-Bose [1] talks about setting the gain on a T1 ToneMatch Audio Engine.
One difference in gain staging the T1 and the Classic is that the T1 has a three-stage trim LED. It lights up green when signal is present, yellow when you are getting pretty loud (8 to 10 dB of headroom left), and red when you dangerously close to or at full scale.
In a way, the yellow trim on the T1 is similar to how you treat the red on the Classic. Some yellow during peaks is good on the T1, just like some red on the Classic is good.
If the T1 trim is going red, you should back off, you are definitely nearing or in compression.
A really helpful feature on the T1 is to go to the Prefs/Output Level menu, and see where you are relative to maximum output.
Power Stand Input Setting
When using the Classic or Model I [2] The T1 has more input capability then the Model 1,s so you should be able to use the T1 as the only control for your system. We have a recommended trim setting for connecting the T1 to a Model 1 input Ch 3 or Ch 4
Note: New recommendation is 3 see below.
With this setting you will not distort or clip the Model 1 no matter what you do on the T1. You can even use the Model 1 without the remote.
The T1 ToneMatch Audio Engine controls are a heck of a lot faster then the R1 controls. There is no perceivable lag.
Input setting recommendation now 3
MikeZ-at-Bose wrote[3] Bill-at-Bose and I have revisited this.
For these conditions:
- T1 going into model I/Classic into Ch 3/4
- balanced OR unbalanced 1/4" cable
- remote unplugged, OR, master volume on remote at 12 o clock
- proper gain staging required on the T1 itself
I'm going to revise the original recommendation of 2 for Ch 3/4 to 3 - under the above conditions.
This will give you the same gain going into the L1 Classic/model I as if you were going through the digital ethercon input on a model II.
If you are using the remote on your M1/CL, then you will need to compensate a bit. If you running the remote master volume at max, then stick with 2on Ch 3/4. I would recommend against running the master volume below 12 o'clock when using a T1.
Hopefully this is helpful - please ask away with any questions for clarification.
MikeZ
Excerpt from the T1 ToneMatch Audio Engine Manual - page 20 - Note: this recommended input setting is now 3. See the note above.
Preamps
Comparison to Model I and Classic
MikeZ-at-Bose tells us:[4]
... (the preamps on the Model I are)... exactly the same as the Classic.
On the T1 ToneMatch Audio Engine they're different, but are designed to the same standard as the L1 Classic preamps.
Functionally they are basically the same in terms of frequency response, input impedance, noise performance, max gains etc.
The difference comes in how we get there. I'll try not to go into horribly boring detail. The name of the game is trade offs, and in the end the design constraints dictate the *best* type of circuit used for *this* particular situation. Here are a couple of the many factors that dictate the differences:
Gain structure. The internal components of the T1 ToneMatch Audio Engine are different that the L1 Model I / L1 Classic and need to have signals fed to them in certain ways. Different designs are more suited to the levels needed than others.
Physical layout of the circuit on the board. There are four channels in a tighter space in the T1 ToneMatch Audio Engine. Again, certain designs lend themselves to be better at this than others.
After evaluating all of the factors that go into the design of a preamp we are using another proven circuit that relies more on discrete transistors rather than op-amps. It fits our needs better for this design situation. The preamp design itself is not necessarily any better or worse. There are *many* ways to skin the cat of preamp design to achieve a desired performance.
Will it sound different? No...I certainly cannot hear a difference playing through it. Can't measure one either.
Hope this sheds some light on it.
MikeZ[5]
Preamps Out
The preamp outputs are before everything except the Trim control in the signal chain. - MikeZ-at-Bose[6]. This means that these are post-trim, and nothing else (e.g. Muting) has any effect on the signal at the preamp outs.
Presets
- ToneMatch™ Presets for the T1™ (downloadable presets that are not installed at the factory)
- T1 ToneMatch™ Presets (includes downloadable lists with cross-references to Version 2 presets).
USB (Computer Interface)
T1 ToneMatch™ Audio Engine/USB
T1 ToneMatch™ Audio Engine/Aux
Cables
From T1 to Model II
Ken-at-Bose[7]
The T1 ToneMatch™ audio engine comes with a really nice Pro Ethercon cable, with robust metal connector shells and an almost memoryless 18' black cable.
However, in a pinch, should you forget the cable, or if say a huge Hammond B3 gets dropped on the cable and severs it, YOU CAN USE ANY ORDINARY CAT 5 ETHERNET CABLE and it will work fine until you replace you nice fancy T1 cable.
Later in that discussion Hilmar-at-Bose tells us:
Any CAT5 (or CAT5e, CAT6, or CAT7) cable will work just fine without any degradation at least initially. The downsides are that most ethernet cables don't coil particularly well and that the connectors wear out over time. After a a few hundred uses you may notice the occasional drop out, at which point it's time to get a new one.
It's certainly a quick and cheap way to get a spare for an emergency.
Convert Cat-5 Cat-6 to Ethercon
NE8MC EtherCon® Cable Connector Carriers (retrofit over an existing RJ-45 Connector).
Example vendor http://www.fullcompass.com/product/255589.html
Cable Length
Up to 50 feet
A technical note from Bill-at-Bose [8]
A 33 or 50 footer will not cause any problems, either with the digital audio (ones and zips) or the power.
The technical reason follows, for those who are interested : A 24 gauge wire (the size typically used in ethernet cables) has about 2.5 Ohms of resistance per 100 feet. The T1 draws roughly 1/4 Amp on each of two supply wire pairs (+/-18V nominal).
For a 50 foot run, each pair of wires (made up of a plus and minus lead) totals 100 feet. A quarter Amp of current across 2.5 Ohms gives, per Ohm's law, a voltage drop of less than one volt (V=IR = 0.625 Volts). Because of the margin we built into the system, it can handle this voltage drop easily.
In fact, although we don't recommend it and can't guarantee it, the digital audio has been tested up to 100 feet in average conditions (for example, no undervoltage on the AC supply at the gig), and quite happily continued to make music.
Over 50 feet
MikeZ-at-Bose added in a later discussion:[9]
Bill at Bose stated you could run 50' of ethernet cable no problem at all. Success at distances longer than that would start to depend on outside factors, for instance the voltage of your power source.
Another option for you is to run the T1 ToneMatch Audio Engine off of the optional power supply, and then run a balanced line from the Master Out on the T1 ToneMatch Audio Engine to the balanced 'analog input' on the L1 Model II. This method would be able to transmit over a hundred feet, perhaps much more.
Optional AC Power Adaptor
5ft of cord from the T1 to the power prick, and a removable 6ft cord from the brick to the wall. Imagine a laptop power cable.[10]
Display Panel
Outdoors
Q: Please talk about using the T1 ToneMatch Audio Engine outdoors. Will I be able to see /read the display? A: Should be no problem. The LCD display on the T1 is "transflexive". In dark conditions the blue backlight will shine through the "transmissible" part so everything is easily visible. In bright sunlight, it becomes "reflexive" just like a piece of paper. The backlight may wash out (i.e. it will not look really blue anymore) but it's still clearly visible. [11]
Design of Visual Components
Quoting Ken-at-Bose[12]
In 23 years at Bose, the L1™ model II and T1 ToneMatch™ audio engine are the most lovingly designed products I have ever had the fortune to work on. More care by more experienced people went into this than anything I've been involved in.
The most minute details were studiously created. As one tiny but important example, a propriety light pipe was designed so that the light from volume knob indicators smoothly wrapped around the knob from top to side, giving the musician a clear indication of volume from any angle. The color and intensity of the light was carefully designed so that it was visible in an extraordinarily wide range of stage lighting conditions.
- ↑ Bill-at-Bose Talks about Gain Staging in the Bose® Musicians Community Message Boards
- ↑ Hilmar-at-Bose talks about setting inputs [1]
- ↑ MikeZ-at-Bose talks about the input setting on the Model I or Classic Power Stand with the T1™
- ↑ MikeZ-at-Bose talks about the preamps in the L1 Model I and the T1™
- ↑ MikeZ-at-Bose talks about the preamps in the L1 Model I and the T1™
- ↑ MikeZ-at-Bose -T1™ Preamp Out Muting
- ↑ Ken-at-Bose Steal this computer cable!!
- ↑ Bill-at-Bose talks about cable lengths
- ↑ MikeZ-at-Bose talks about T1 cable lengths
- ↑ Optional AC Power Adapter
- ↑ Hilmar-at-Bose talks about the transflexive display on the T1™
- ↑ Ken-at-Bose speaks about development of the T1 ToneMatch™ audio engine