T4S to Two S1 Pro Systems (Stereo)

Here's a quick overview of how you can connect a T4S to an S1 Pro

• Leave the T4S and S1 Pro turned off until you have things connected
• Connect the T4S power supply to the T4S (T4S power supply sold separately)
• Connect the T4S Right Output to the Right S1 Pro System channel 1 or 2
• Connect the T4S Left Output to the Left S1 Pro System channel 1 or 2

• Use 1/4 inch (6.35 mm) Tip-Ring-Sleeve cables for best results

• On each {{S1} Pro channel your are using:
• Turn off the reverb
• Set both tone controls to the center position (12:00 o'clock)
• Set the channel volume off
• Set the ToneMatch switch to Off

Turn on the T4S

• On the T4S
  1. Set the Rotary Selector to PAN/AUX
  2. Press the CH EDIT button for each channel you are using and pan the input left or right as required

Connect all your sound sources to the T4S

Turn on the S1 Pro

Bring up the channel volume on the S1 Pro to the center position

If you have questions, please join the conversation in the Bose Portable PA Community.

---