T8S Aux Send Channel Inputs to Different Aux Outputs

From Bose Portable PA Encyclopedia
Jump to: navigation, search
How do I send each channel to a different Aux output or than one channel to more than one Aux output.

In this example, we will send:

  • Channel 1 to Aux 1
  • Channel 2 to Aux 2
  • Channel 3 to Aux 3
  • Channel 4 to Aux 1 and Aux 2

We will talk about how you route the signals here. To learn more about individual settings please see T8S Aux.

Here are text instructions to lead to the same outcome.

Turn the Rotary Selector to PAN/AUX

Channel 1 to Aux 1
  1. Press Channel 1 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 1 routed to Aux 1


Channel 2 to Aux 2
  1. Press Channel 2 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 2 routed to Aux 2


Channel 3 to Aux 3
  1. Press Channel 3 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 3 routed to Aux 3


Channel 4 to Aux 1 and Aux 2
  1. Press Channel 4 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 4 routed to Aux 1

  8. Turn Menu knob (the left most button under the display) until
    Aux Send 2 is highlighted.
  9. Press the menu knob
  10. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  11. Press the last button (right most button) and turn until you highlight
  12. Post: After Fader (you can choose Dry or Pre if you prefer)
  13. You're have sent Channel 4 routed to Aux 2 (as well as Aux 1)

If you have questions or comments about this article please post a reply in this discussion in the Bose Portable PA Community