Difference between revisions of "ToneMatch Mixer without L1"
m (added MikeZ comments) |
m |
||
| Line 1: | Line 1: | ||
A note from Ken-at-Bose | A note from Ken-at-Bose | ||
| − | On the subject of whether the T1 can be used without the L1, I would like to comment on one particular aspect. | + | On the subject of whether the {{T1}} can be used without the L1, I would like to comment on one particular aspect. |
| − | Should you or should you not use a ToneMatch preset when using the T1 with other systems? | + | Should you or should you not use a ToneMatch preset when using the {{T1}} with other systems? |
| − | ToneMatch presets optimize the sound of a microphone or instrument when used with an L1 system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems. | + | {{ToneMatch}} presets optimize the sound of a microphone or instrument when used with an {{L1}} system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems. |
But that wouldn't be quite right. | But that wouldn't be quite right. | ||
| − | If that other system had a similar "voicing" or tonal response as the L1 then you would expect the ToneMatch preset to be of value with that other system. | + | If that other system had a similar "voicing" or tonal response as the L1 then you would expect the {{ToneMatch}} preset to be of value with that other system. |
| − | There are potentially a class of systems that fit this description. The L1 system is voiced to make high quality commercial recordings sound the best we know how. Some studio systems are voiced the same way, as they are where those recordings were mixed. | + | There are potentially a class of systems that fit this description. The {{L1}} system is voiced to make high quality commercial recordings sound the best we know how. Some studio systems are voiced the same way, as they are where those recordings were mixed. |
| − | Thus, on some studio systems, you should expect ToneMatch presets to be of value. | + | Thus, on some studio systems, you should expect {{ToneMatch}} presets to be of value. |
| − | Other systems, including PA speakers and monitor speakers are voiced in an almost random and widely varying way, in our experience. Thus, as MikeZ points out, it's impossible to say whether a ToneMatch preset will help or hurt. | + | Other systems, including PA speakers and monitor speakers are voiced in an almost random and widely varying way, in our experience. Thus, as MikeZ points out, it's impossible to say whether a {{ToneMatch}} preset will help or hurt. |
With best regards, | With best regards, | ||
| Line 26: | Line 26: | ||
MikeZ Comment to which Ken refers above. | MikeZ Comment to which Ken refers above. | ||
| − | The whole thing with using the T1 with other systems is that we don't really know how its going to sound since all big house systems are different. Generally folks have reported the presets work well - so I think you will be fine with them. If the presets are not working, you can always go Flat using the Acoustic Guitar zEQ for adjustments (last preset in the Acoustic Guitar bank). And you'll still have all of the effects and tools in the T1 at your disposal. | + | The whole thing with using the {{T1}} with other systems is that we don't really know how its going to sound since all big house systems are different. Generally folks have reported the presets work well - so I think you will be fine with them. If the presets are not working, you can always go Flat using the Acoustic Guitar zEQ for adjustments (last preset in the Acoustic Guitar bank). And you'll still have all of the effects and tools in the T1 at your disposal. |
Source: [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/7371070725?r=2541001725#2541001725 Using the T1® without the L1®] on the {{Forum}} | Source: [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/7371070725?r=2541001725#2541001725 Using the T1® without the L1®] on the {{Forum}} | ||
Revision as of 10:32, 6 September 2009
A note from Ken-at-Bose
On the subject of whether the T1 ToneMatch Audio Engine can be used without the L1, I would like to comment on one particular aspect.
Should you or should you not use a ToneMatch preset when using the T1 ToneMatch Audio Engine with other systems?
ToneMatch® presets optimize the sound of a microphone or instrument when used with an L1 system. So this might lead you to conclude that a ToneMatch preset shouldn't be used with other systems.
But that wouldn't be quite right.
If that other system had a similar "voicing" or tonal response as the L1 then you would expect the ToneMatch® preset to be of value with that other system.
There are potentially a class of systems that fit this description. The L1 system is voiced to make high quality commercial recordings sound the best we know how. Some studio systems are voiced the same way, as they are where those recordings were mixed.
Thus, on some studio systems, you should expect ToneMatch® presets to be of value.
Other systems, including PA speakers and monitor speakers are voiced in an almost random and widely varying way, in our experience. Thus, as MikeZ points out, it's impossible to say whether a ToneMatch® preset will help or hurt.
With best regards,
Ken
Source: Using the T1® without the L1® on the Bose® Pro Portable PA Community
MikeZ Comment to which Ken refers above.
The whole thing with using the T1 ToneMatch Audio Engine with other systems is that we don't really know how its going to sound since all big house systems are different. Generally folks have reported the presets work well - so I think you will be fine with them. If the presets are not working, you can always go Flat using the Acoustic Guitar zEQ for adjustments (last preset in the Acoustic Guitar bank). And you'll still have all of the effects and tools in the T1 at your disposal.
Source: Using the T1® without the L1® on the Bose® Pro Portable PA Community