Difference between revisions of "Mixer / Yamaha / MG124 CX"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 14: Line 14:
  
 
===== ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  =====
 
===== ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  =====
 +
The output of this mixer is balanced, and the input on the Model II Power Stand  is also balanced, so this is the preferred method.
 +
 
[[Image:trsMtrsM.png|Tip-Ring-Sleeve to Tip-Ring-Sleeve]]
 
[[Image:trsMtrsM.png|Tip-Ring-Sleeve to Tip-Ring-Sleeve]]
  
 
===== ¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced) =====
 
===== ¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced) =====
 +
 
[[Image:TsMtsM.png|Tip-Sleeve to Tip-Sleeve]]
 
[[Image:TsMtsM.png|Tip-Sleeve to Tip-Sleeve]]
  
 
===== ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Sleeve (unbalanced)  =====
 
===== ¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Sleeve (unbalanced)  =====
 +
 
[[Image:trsMtsM.png|Tip-Ring-Sleeve to Tip-Sleeve]]
 
[[Image:trsMtsM.png|Tip-Ring-Sleeve to Tip-Sleeve]]
  
  
This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve  cable. This is because the ¼ Inch  input on the Bose System is Tip-Sleeve (unbalanced) anyway.
+
 
 
</td></tr></table>
 
</td></tr></table>
  

Revision as of 12:46, 19 September 2012

To use a Yamaha MG124 CX Mixer with the L1 Model II

On the mixer

  • pan all the inputs hard LEFT
  • run a line out of the LEFT output to the Model II Power Stand Analog input (cable details below)

YamahaMG124 to Model II Power Stand Analog Input.png

Cable Details

¼ inch jack inch to ¼ inch

This mixer has ¼ inch jack balanced outputs. Any of the cables shown below should work.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

The output of this mixer is balanced, and the input on the Model II Power Stand is also balanced, so this is the preferred method.

Tip-Ring-Sleeve to Tip-Ring-Sleeve

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve