Difference between revisions of "T1 ToneMatch® Audio Engine / Aux to a Separate System"
m (formatting) |
m (You will probably end up at or near 100%) |
||
Line 10: | Line 10: | ||
# Press button 2 to see the Tap menu <br /> [[Image:T1AuxSplit04.png]]<br /> | # Press button 2 to see the Tap menu <br /> [[Image:T1AuxSplit04.png]]<br /> | ||
# Turn the Tap setting to '''Pre: With EQ & FX'''. Press the button to Select. <br /> [[Image:T1AuxSplit05.png]]<br /> | # Turn the Tap setting to '''Pre: With EQ & FX'''. Press the button to Select. <br /> [[Image:T1AuxSplit05.png]]<br /> | ||
− | # Set the Channel Volume to 0 (zero). I set the Volume to 0 to avoid unwanted consequences of accidentally hitting Mute. <br /> [[Image:T1AuxSplit06.png]]<br /> | + | # Set the Channel Volume to 0 (zero). <br />I set the Volume to 0 to avoid unwanted consequences of accidentally hitting Mute. <br /> [[Image:T1AuxSplit06.png]]<br /> |
− | # Adjust Aux Volume if necessary <br />[[Image:T1AuxSplit02.png]]<br /> | + | # Adjust Aux Volume if necessary. <br />You will probably end up at or near 100% <br />[[Image:T1AuxSplit02.png]]<br /> |
---- | ---- | ||
[[Category:T1]] | [[Category:T1]] | ||
[[Category:T1Aux]] | [[Category:T1Aux]] |
Revision as of 18:57, 29 October 2007
Using Aux to exclusively to a second System
Using a T1 ToneMatch Audio Engine with two L1 s, you may want to send an input to one System, but not the other.
In this example, we are taking an input in Channel 3, and sending it to Aux, and not to Main.
- Set the Selector to Aux
- Press CH Edit for Channel 3
- Press button 1 to enable Aux
- Press button 2 to see the Tap menu
- Turn the Tap setting to Pre: With EQ & FX. Press the button to Select.
- Set the Channel Volume to 0 (zero).
I set the Volume to 0 to avoid unwanted consequences of accidentally hitting Mute.
- Adjust Aux Volume if necessary.
You will probably end up at or near 100%