Difference between revisions of "T1® Stereo Sources"
m |
m (ST moved page T1® Stereo Sources to T1® Stereo Sources) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
From the original diagrams it looks like this kind of cable may work. | From the original diagrams it looks like this kind of cable may work. | ||
| − | + | [[Image:18stereoTo14stereo.png|800px]] | |
;Correction - use a cable like this connected to {{T1}} Channels 4/5 | ;Correction - use a cable like this connected to {{T1}} Channels 4/5 | ||
Latest revision as of 03:25, 26 March 2017
To connect a stereo source to a T1 ToneMatch Audio Engine see: Backing Tracks
Warning about Cables
If you use a cable like this to connect a stereo source to the T1 ToneMatch Audio Engine
- In Channels 1,2,3 you will hear only one side of the stereo source
- In Channels 4 or 5 the left and right channels from the source will tend to cancel each other out and you will get little or no output.
Corrections to the T1® Owners Guide pages 38 and 40
From the original diagrams it looks like this kind of cable may work.
- Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5
Original page (red x indicates error)
- Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5
Original page (red x indicates error)
- Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5
