Difference between revisions of "Allen & Heath ZED Sixty 14FX to Two L1 Compacts"
(Created page with "This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an [http://www.allen-heath.com/ahproducts/zed60-14f...") |
m |
||
Line 1: | Line 1: | ||
− | This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an [http://www.allen-heath.com/ahproducts/zed60-14fx/ Allen & Heath ZED Sixty-14FX]. | + | This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an [http://www.allen-heath.com/ahproducts/zed60-14fx/ Allen & Heath ZED Sixty-14FX]. If you have questions please [https://www.bosepro.community/g/portable/topic/mixer-hookup?reply=28192162826775990#28192162826775990 join the discussion in the Bose Pro Portable PA Community]. |
From the Allen & Heath mixer: | From the Allen & Heath mixer: | ||
Line 11: | Line 11: | ||
[[File:Compact Channel 2 Green.png]] | [[File:Compact Channel 2 Green.png]] | ||
+ | Set Channel 1 volume to zero. | ||
For each L1® Compact use a cable like this. | For each L1® Compact use a cable like this. | ||
Line 16: | Line 17: | ||
[[File:MP-105 600w DETAILw.jpg|400px|link=http://www.audiopile.net/MP-105]] | [[File:MP-105 600w DETAILw.jpg|400px|link=http://www.audiopile.net/MP-105]] | ||
− | + | ||
Set the Channel 2 volume so that you see solid green most of the time. If you see solid red, turn it down. Then control the overall volume from the mixer. | Set the Channel 2 volume so that you see solid green most of the time. If you see solid red, turn it down. Then control the overall volume from the mixer. |
Revision as of 13:06, 25 June 2017
This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an Allen & Heath ZED Sixty-14FX. If you have questions please join the discussion in the Bose Pro Portable PA Community.
From the Allen & Heath mixer:
Connect the Left output to one L1® Compact and the Right output to the other L1® Compact.
On the L1® Compacts set the ToneMatch switch to Line Level (down).
Set Channel 1 volume to zero.
For each L1® Compact use a cable like this.
Set the Channel 2 volume so that you see solid green most of the time. If you see solid red, turn it down. Then control the overall volume from the mixer.