Difference between revisions of "Pedal Steel Guitar"
m (templates for model II and T1) |
m (Categories) |
||
| Line 1: | Line 1: | ||
| − | Brian Terry provided this information about his settings with his Pedal Steel Guitar and his {{Model II}} and {{T1}}. | + | Brian Terry provided this information about his settings with his Pedal Steel Guitar and his {{Model II}} and {{T1}}. |
| − | Hi guys, I did purchase {{Model II no link} | + | Hi guys, I did purchase {{Model II no link} with {{T1 nl}} and I'm very impressed and as promised here are my settings I'm currently experimenting with, But PLEASE NOTE that I'm using a Peavey Profex 11 with Newmans, Larry Sasser Settings and Mullen S10 Royal Precision pedal Steel with Goodrich vol pedal So here goes |
| − | * Preset Rickenbaker 4001 bass | + | *Preset Rickenbaker 4001 bass |
| − | * ZEQ low 5.8 Mid 3.8 High 10.4 | + | *ZEQ low 5.8 Mid 3.8 High 10.4 |
| − | * Para EQ level 1.8 Freq 1.65 width2.07 | + | *Para EQ level 1.8 Freq 1.65 width2.07 |
| − | * Comp Gate thresh .76 Speed 50% | + | *Comp Gate thresh .76 Speed 50% |
| − | * Delay Digital Mix 19% Time 57 ms | + | *Delay Digital Mix 19% Time 57 ms |
| − | * Reverb Mix 19% Bright 91% | + | *Reverb Mix 19% Bright 91% |
| − | * Reverb Type Medium Room Time 1.7 Bal 50% | + | *Reverb Type Medium Room Time 1.7 Bal 50% |
| − | Regards Brian Terry | + | Regards Brian Terry |
| + | <br> Original post [http://bose.infopop.cc/eve/forums/a/tpc/f/6366055944/m/3201046745?r=3691081875#3691081875 Bose amp System for Pedal Steel Guitar] | ||
| − | + | ---- | |
| − | |||
[[Category:Instruments]] | [[Category:Instruments]] | ||
| + | |||
| + | |||
| + | [[Category:Guitar]] | ||
Revision as of 13:07, 10 December 2008
Brian Terry provided this information about his settings with his Pedal Steel Guitar and his L1 Model II and T1 ToneMatch Audio Engine.
Hi guys, I did purchase {{Model II no link} with T1 ToneMatch® Audio Engine and I'm very impressed and as promised here are my settings I'm currently experimenting with, But PLEASE NOTE that I'm using a Peavey Profex 11 with Newmans, Larry Sasser Settings and Mullen S10 Royal Precision pedal Steel with Goodrich vol pedal So here goes
- Preset Rickenbaker 4001 bass
- ZEQ low 5.8 Mid 3.8 High 10.4
- Para EQ level 1.8 Freq 1.65 width2.07
- Comp Gate thresh .76 Speed 50%
- Delay Digital Mix 19% Time 57 ms
- Reverb Mix 19% Bright 91%
- Reverb Type Medium Room Time 1.7 Bal 50%
Regards Brian Terry
Original post Bose amp System for Pedal Steel Guitar