T1® No Sound

If you have no sound coming through your T1 ToneMatch Audio Engine.

Check Inputs

If you are using 1/4 inch inputs make sure that you are using the inputs in the top row (in the center of the XLR/Combo inputs). NOT the Preamp Outputs in the bottom row.

Check Input Levels

1. Turn the Rotary Selector to Prefs
2. Turn Select knob to Input Level, press to see the Input Levels

Check Channel Mute Buttons

Make sure that the Channel Mute buttons are NOT lit.

Check Output Levels

1. Turn the Rotary Selector to Prefs
2. Turn Select knob to Output Level, press to see the Input Levels

---