T1 ToneMatch® Audio Engine / Shared Scenes

From Bose Portable PA Encyclopedia
Revision as of 15:15, 9 June 2012 by ST (talk | contribs)
Jump to: navigation, search


Get the L1® Updater Software


These are the latest versions of the ToneMatch Updater application.

ToneMatch® Updater Software application. (two versions available)

If you have questions please see ToneMatch Updater discussion.


To update your L1 Model II with a T1 ToneMatch Audio Engine use the older version of the L1 Updater software


macOS Issues

[Filename] can't be opened because the identity of the developer cannot be confirmed

If you see "[Filename] can't be opened because the identity of the developer cannot be confirmed" message displayed

Mac OSX users may see this message when trying to install a Bose app. If this message appears, try the following:

Mac users may need to hold the Control key (Ctrl) when opening the file.

Various versions of the Mac OS cannot identify Bose as a developer. The Mountain Lion version of OS X (10.8) includes a feature called Gatekeeper to protect users from installing applications of non-Apple identified developers. The Mavericks version of OS X (10.9.5) temporarily cannot identify Bose as a developer as well.

To open the application, follow these steps:

  • Press and hold the Control key while clicking on the application icon
    • Note: Do not use Launchpad to do this. Launchpad doesn’t allow you to access the shortcut menu

In the menu that appears, select Open at the top of the list

A confirmation window will appear. Select Open

Without Control click:

SoundTouch-osx-installer 01.png


With Control click:

SoundTouch-osx-installer 02.png

More information on Gatekeeper can be found at http://support.apple.com/kb/HT5290






Warning

If your firmware update is not successful - Caution

After you update the T1 ToneMatch Audio Engine or L1 Model II firmware, if you see a window on the PC that says the update was not successful, you should:

  1. turn the L1 and T1 off
  2. wait three seconds
  3. then turn the L1 and T1 back on

Do this before trying the update again!

This allows the L1 and T1s to re-establish a good copy of the software.

Source: If your firmware update is not successful - Caution



L1 updaterUserSceneBackup.png

L1 updaterUserSceneBackup1.png

L1 updaterUserSceneUpdate.png

File:L1 updaterUserSceneUpdate2.png