T1 ToneMatch® Audio Engine / Aux to a Separate System
Using a T1 ToneMatch Audio Engine with two L1 s, you may want to send an input to one System, but not the other.
In this example, we are taking an input in Channel 3, and sending it to Aux, and not to Main.
- Set the Selector to Aux
- Press CH Edit for Channel 3
- Press button 1 to enable Aux
- Press button 2 to see the Tap menu
- Turn the Tap setting to Pre: With EQ & FX. Press the button to Select. Now the channel volume will have no effect.
- Set the Channel Volume to 0 (zero)
- Adjust Aux Volume if necessary