Difference between revisions of "Allen & Heath ZED Sixty 14FX to Two L1 Compacts"
m |
m |
||
Line 1: | Line 1: | ||
− | This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an [http://www.allen-heath.com/ahproducts/zed60-14fx/ Allen & Heath ZED Sixty-14FX]. If you have questions please [https://www.bosepro.community/g/portable/topic/mixer-hookup?reply=28192162826775990#28192162826775990 join the discussion in the Bose Pro Portable PA Community]. | + | This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an [http://www.allen-heath.com/ahproducts/zed60-14fx/ Allen & Heath ZED Sixty-14FX]. The principles presented here are applicable to many other mixers. |
+ | |||
+ | If you have questions please [https://www.bosepro.community/g/portable/topic/mixer-hookup?reply=28192162826775990#28192162826775990 join the discussion in the Bose Pro Portable PA Community]. | ||
From the Allen & Heath mixer: | From the Allen & Heath mixer: |
Latest revision as of 13:16, 25 June 2017
This setup could be used by a musical group or DJ using a mixer to run two L1® Compacts. For this discussion, we are using an Allen & Heath ZED Sixty-14FX. The principles presented here are applicable to many other mixers.
If you have questions please join the discussion in the Bose Pro Portable PA Community.
From the Allen & Heath mixer:
Connect the Left output to one L1® Compact and the Right output to the other L1® Compact.
On the L1® Compacts set the ToneMatch switch to Line Level (down).
Set Channel 1 volume to zero.
For each L1® Compact use a cable like this.
Set the Channel 2 volume so that you see solid green most of the time. If you see solid red, turn it down. Then control the overall volume from the mixer.