Difference between revisions of "Effects/TC-Helicon/VoiceLive"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(first edition)
 
({{:PS1 Powerstand/Effects/Serial}})
Line 1: Line 1:
<!-- Outline for Effects Units documentation with the PS1 Powerstand -->
 
<!-- Naming Convention
 
Effect/Make/Model
 
e.g. Effect/Alesis/NanoVerb
 
-->
 
 
 
<big>''' TC-Helicon VoiceLive (Insert Method) '''</big>  
 
<big>''' TC-Helicon VoiceLive (Insert Method) '''</big>  
 
Serial Effects - Excerpt from the PS1 Powerstand Manual
 
 
http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif
 
 
 
I noticed that the VoiceLive is setup for balanced inputs and outputs. Setting that aside for now... this should work.
 
  
 
The VoiceLive Manual says "Note: Optimal connection to balanced equipment is achieved using balanced cables. However, if your equipment is NOT balanced you will generally have no problems."
 
The VoiceLive Manual says "Note: Optimal connection to balanced equipment is achieved using balanced cables. However, if your equipment is NOT balanced you will generally have no problems."
Line 24: Line 11:
  
 
Purple "Tip" is the Return to the Bose System
 
Purple "Tip" is the Return to the Bose System
 
 
If you get things connected according to the two manuals, you should be able to hear your effects. Since you are running 'unbalanced' (and you really don't have an option to do otherwise) you may pick up some noise (but I doubt you will).
 
  
 
Important: VoiceLive Mic In Select button
 
Important: VoiceLive Mic In Select button
Line 34: Line 18:
  
 
http://bose.infopop.cc/eve/forums/a/ga/ul/9591057142/inlineimg/Y/voiceLiveRearPanel3.gif
 
http://bose.infopop.cc/eve/forums/a/ga/ul/9591057142/inlineimg/Y/voiceLiveRearPanel3.gif
 +
 +
{{:PS1 Powerstand/Effects/Serial}}
  
 
See the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/4501067142
 
See the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/4501067142
 
  Original post in the Bose® Musicians Community Message Boards]
 
  Original post in the Bose® Musicians Community Message Boards]
 +
 +
  
 
[[category:Effects PS1 Powerstand]]  
 
[[category:Effects PS1 Powerstand]]  

Revision as of 13:42, 26 December 2006

TC-Helicon VoiceLive (Insert Method)

The VoiceLive Manual says "Note: Optimal connection to balanced equipment is achieved using balanced cables. However, if your equipment is NOT balanced you will generally have no problems."

Links

voiceLiveRearPanel.gif

Blue "Ring" is Send from the Bose System

Purple "Tip" is the Return to the Bose System

Important: VoiceLive Mic In Select button Make sure this is *not* pushed in as this overrides the routing through the Inputs/Ouputs documented above.

The VoiceLive Manual says "MIC IN SELECT Button - This selects the microphone for the Vocal input. When not pressed, VoiceLive defaults to the Line input."

voiceLiveRearPanel3.gif


Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

PS1InsertParallela.png

Insert Cable

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable


A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.

TipRingSleevePS1.gif

and this is connected to one of the PS1 Powerstand Insert Points

Channel 1 and Channel 2 Insert Points (blue)



See the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/4501067142

Original post in the Bose® Musicians Community Message Boards]