Difference between revisions of "Jazz Guitar"
m |
m |
||
| Line 1: | Line 1: | ||
Recommended ToneMatch Presets for Jazz Guitars (semi-acoustic archtop electric guitars) | Recommended ToneMatch Presets for Jazz Guitars (semi-acoustic archtop electric guitars) | ||
| + | == ToneMatch Mixers == | ||
<html> | <html> | ||
| − | <img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/25094437276992697/filePointer/25517068216465783/fodoid/25517068216465779/imageType/MEDIUM/inlineImage/true/mceclip0.png" /></html> | + | <img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/25094437276992697/filePointer/25517068216465783/fodoid/25517068216465779/imageType/MEDIUM/inlineImage/true/mceclip0.png" width="600px" /></html> |
<p>This is the same as Utility/Flat except it sets the[[ZEQ]] centers for Low, Mid, High to useful values for electric guitar. | <p>This is the same as Utility/Flat except it sets the[[ZEQ]] centers for Low, Mid, High to useful values for electric guitar. | ||
| Line 8: | Line 9: | ||
Here's another one to try. | Here's another one to try. | ||
| − | <html><img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/40582958971916900/filePointer/40442221462902638/fodoid/40442221462902634/imageType/MEDIUM/inlineImage/true/mceclip0.png" /></html> | + | <html><img src="https://www.bosepro.community/fileSendAction/fcType/0/fcOid/40582958971916900/filePointer/40442221462902638/fodoid/40442221462902634/imageType/MEDIUM/inlineImage/true/mceclip0.png" width="600px"/></html> |
<p>This sounds like you're running clean through a 12 inch loudspeaker in a guitar cabinet.</p> | <p>This sounds like you're running clean through a 12 inch loudspeaker in a guitar cabinet.</p> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | == {{Compact}} == | ||
| + | Connect your guitar directly to the {{Compact}} channel 2. Set the ToneMatch switch to Line Level (down position). This will give you the flattest response. | ||
| + | [[File:Compact_Channel_2_Line_Level.png]] | ||
| + | If you find the tone is too bassy, set the ToneMatch switch to Guitar (up position) | ||
| + | == {{S1}} == | ||
| + | You may be closer to the {{S1}} than the other models above. Try all three ToneMatch Presets. | ||
| + | * Off - is flat | ||
| + | * Guitar - rolls of some bass | ||
| + | * Mic - more emphasis on vocal frequencies and low end roll off | ||
| + | [[File:S1_Pro_ToneMatch_Switch.jpg]] | ||
| − | + | ---- | |
| + | [[Category:ToneMatch]] | ||
| + | [[Category:Settings]] | ||
| + | [[Category:Guitar]] | ||
| + | [[Category:S1]] | ||
| + | [[Category:L1]] | ||
| + | [[Category:Compact]] | ||
Revision as of 15:47, 12 February 2019
Recommended ToneMatch Presets for Jazz Guitars (semi-acoustic archtop electric guitars)
ToneMatch Mixers
This is the same as Utility/Flat except it sets theZEQ centers for Low, Mid, High to useful values for electric guitar.
Here's another one to try.
This sounds like you're running clean through a 12 inch loudspeaker in a guitar cabinet.
L1 Compact
Connect your guitar directly to the L1 Compact channel 2. Set the ToneMatch switch to Line Level (down position). This will give you the flattest response.
If you find the tone is too bassy, set the ToneMatch switch to Guitar (up position)
S1 Pro System
You may be closer to the S1 Pro System than the other models above. Try all three ToneMatch Presets.
- Off - is flat
- Guitar - rolls of some bass
- Mic - more emphasis on vocal frequencies and low end roll off
