MA 12

From Bose Portable PA Encyclopedia FAQ & Wiki
Jump to: navigation, search

Comparing the MA 12 to the L1™


The actual physical behavior of the L1 (and most other speakers for that matter) is very complicated and it's very difficult to express this through a specification with only a few numbers. That's one of the reasons why are very reluctant to publish specification: More often then not they are interpreted incorrectly and people draw the wrong conclusions.
Let me try to clarify the MA 12 spec:

First of all the “1-4 kHz” spec describes the behavior of the MA12 in this frequency range. It doesn’t talk about other frequencies at all. In particular, it does NOT state that it’s not a cylindrical radiator outside this range. In fact it’s an even better cylindrical radiator above that range. The correct way to read this would be “This picture shows what happens in the 1-4 kHz range. If you are interested in different frequencies please refer to our additional documentation. If you do, please make sure you understand the meaning of polar plots, sensitivity, and efficiency, for cylindrical radiator as they are much different from spherical wave loudspeaker”.

Second, the data concerns a single MA12 in free space. The L1 is twice the height and also designed to work with a significant floor reflection. The effective height of an L1 is roughly 3 to 4 times that of a single MA 12, so trying to draw any conclusion on the L1 by looking at a single MA12 is really not appropriate.


original post - Hilmar-at-Bose