Difference between revisions of "Mixer / Yamaha / MG124 CX"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Documents)
m (Overview)
Line 11: Line 11:
 
* Run a line out of the LEFT output  to the Model II Power Stand  Analog input (cable details below)
 
* Run a line out of the LEFT output  to the Model II Power Stand  Analog input (cable details below)
 
[[Image:YamahaMG124 to Model II Power Stand Analog Input.png]]
 
[[Image:YamahaMG124 to Model II Power Stand Analog Input.png]]
 +
 +
==== Settings on the L1® Input Panel ====
 +
Start off with the Input Trim at '''3''' and adjust if necessary so that the Signal/OL light stays green most of the time. Occasional flickers of yellow are okay. If it is flickering or solid red, turn down the Input Trim.
 +
 +
[[Image:ModelIIInputsForTwoLT1.png]]
  
 
==== Cable Details ====
 
==== Cable Details ====

Revision as of 14:01, 19 September 2012

To use a Yamaha MG124 CX Mixer with the L1 Model II


Overview

On the mixer

  • Pan all the inputs hard LEFT
  • Run a line out of the LEFT output to the Model II Power Stand Analog input (cable details below)

YamahaMG124 to Model II Power Stand Analog Input.png

Settings on the L1® Input Panel

Start off with the Input Trim at 3 and adjust if necessary so that the Signal/OL light stays green most of the time. Occasional flickers of yellow are okay. If it is flickering or solid red, turn down the Input Trim.

ModelIIInputsForTwoLT1.png

Cable Details

¼ inch jack inch to ¼ inch

This mixer has ¼ inch jack balanced outputs. Any of the cables shown below should work.


¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

The output of this mixer is balanced, and the input on the Model II Power Stand is also balanced, so this is the preferred method.

Tip-Ring-Sleeve to Tip-Ring-Sleeve

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve


Documents

YamahaMG124 Output.png