Difference between revisions of "PS1 Powerstand / Signal Flow"
(Kyle's contribution -- signal flow) |
(Hilmar's notes on the preamp) |
||
| Line 1: | Line 1: | ||
| + | === Signal Flow === | ||
Q: What happens to my input on Channel 1 or 2 as it flows through the {{PS1}}? | Q: What happens to my input on Channel 1 or 2 as it flows through the {{PS1}}? | ||
| − | A: As provided by Kyle-at-Bose <ref>Kyle-at-Bose [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=6921014061&r=9701065514#9701065514 in the Bose Musicians Discussion Boards</ref> | + | A: As provided by Kyle-at-Bose <ref>Kyle-at-Bose [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=6921014061&r=9701065514#9701065514 in the Bose Musicians Discussion Boards]</ref> |
| − | # Input Line(¼ inch) or XLR | + | # Input Line (¼ inch) or XLR input |
# Trim | # Trim | ||
# {{R1}} Channel Level | # {{R1}} Channel Level | ||
| Line 7: | Line 8: | ||
# {{R1}} EQ | # {{R1}} EQ | ||
# Preset Processing | # Preset Processing | ||
| − | # Crossover {{L1 CR}} and {{B1}} if B1 is present or {{L1 CR}} if something is inserted in Bass Line-Out | + | # Crossover |
| + | ##{{L1 CR}} and {{B1}} if B1 is present or | ||
| + | ##{{L1 CR}} and Bass Line-Out if something is inserted in Bass Line-Out | ||
# Master Level | # Master Level | ||
| + | === Preamps === | ||
| + | Q: Do I get the benefits of the Preamps if I use the ¼ inch inputs on the {{PS1}} Channel 1 or 2 | ||
| + | A: Yes. Whether or you use the Input Line (¼ inch) or XLR input the signal flows through the Preamp. | ||
| + | Hilmar-at-Bose <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/8491032313?r=4771073313#4771073313 in the Bose Musicians Discussion Boards]</ref> | ||
| + | Both XLR and ¼ inch input go through the same preamp but they see a little different conditioning before they get there. The XLR connects to a is balanced low impedance input stage with a lot of gain. The ¼ inch input is unbalanced, has about 20 dB less overall gain but a very high input impedance. | ||
| − | [[Image:SignalFlow2. | + | Q: What is the input impedance of the ¼ inch Channel 1 or Channel 2 Inputs |
| + | A: Approximately 1 megOhm. | ||
| + | |||
| + | |||
| + | [[Image:SignalFlow2.gif]] | ||
<noinclude> | <noinclude> | ||
---- | ---- | ||
Revision as of 00:15, 11 December 2006
Signal Flow
Q: What happens to my input on Channel 1 or 2 as it flows through the PS1 Power Stand (Classic) / Model I? A: As provided by Kyle-at-Bose [1]
- Input Line (¼ inch) or XLR input
- Trim
- R1 Remote Channel Level
- Insert Loop
- R1 Remote EQ
- Preset Processing
- Crossover
- L1 Cylindrical Radiator® loudspeaker and B1 Bass Module if B1 is present or
- L1 Cylindrical Radiator® loudspeaker and Bass Line-Out if something is inserted in Bass Line-Out
- Master Level
Preamps
Q: Do I get the benefits of the Preamps if I use the ¼ inch inputs on the PS1 Power Stand (Classic) / Model I Channel 1 or 2 A: Yes. Whether or you use the Input Line (¼ inch) or XLR input the signal flows through the Preamp. Hilmar-at-Bose [2] Both XLR and ¼ inch input go through the same preamp but they see a little different conditioning before they get there. The XLR connects to a is balanced low impedance input stage with a lot of gain. The ¼ inch input is unbalanced, has about 20 dB less overall gain but a very high input impedance.
Q: What is the input impedance of the ¼ inch Channel 1 or Channel 2 Inputs A: Approximately 1 megOhm.
- ↑ Kyle-at-Bose in the Bose Musicians Discussion Boards
- ↑ Hilmar-at-Bose in the Bose Musicians Discussion Boards