Difference between revisions of "PS1 Powerstand / Signal Flow"
(Hilmar's notes on the preamp) |
m (formatting) |
||
| Line 1: | Line 1: | ||
=== Signal Flow === | === Signal Flow === | ||
Q: What happens to my input on Channel 1 or 2 as it flows through the {{PS1}}? | Q: What happens to my input on Channel 1 or 2 as it flows through the {{PS1}}? | ||
| + | |||
A: As provided by Kyle-at-Bose <ref>Kyle-at-Bose [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=6921014061&r=9701065514#9701065514 in the Bose Musicians Discussion Boards]</ref> | A: As provided by Kyle-at-Bose <ref>Kyle-at-Bose [http://bose.infopop.cc/eve/forums?a=tpc&f=3976055944&m=6921014061&r=9701065514#9701065514 in the Bose Musicians Discussion Boards]</ref> | ||
# Input Line (¼ inch) or XLR input | # Input Line (¼ inch) or XLR input | ||
| Line 15: | Line 16: | ||
=== Preamps === | === Preamps === | ||
Q: Do I get the benefits of the Preamps if I use the ¼ inch inputs on the {{PS1}} Channel 1 or 2 | Q: Do I get the benefits of the Preamps if I use the ¼ inch inputs on the {{PS1}} Channel 1 or 2 | ||
| + | |||
A: Yes. Whether or you use the Input Line (¼ inch) or XLR input the signal flows through the Preamp. | A: Yes. Whether or you use the Input Line (¼ inch) or XLR input the signal flows through the Preamp. | ||
| − | Hilmar-at-Bose <ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/8491032313?r=4771073313#4771073313 in the Bose Musicians Discussion Boards]</ref> | + | |
| − | Both XLR and ¼ inch input go through the same preamp but they see a little different conditioning before they get there. The XLR connects to a is balanced low impedance input stage with a lot of gain. The ¼ inch input is unbalanced, has about 20 dB less overall gain but a very high input impedance. | + | Hilmar-at-Bose provided this:<ref>Hilmar-at-Bose [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/8491032313?r=4771073313#4771073313 in the Bose Musicians Discussion Boards]</ref> |
| + | |||
| + | Both XLR and ¼ inch input go through the same preamp but they see a little different conditioning before they get there. | ||
| + | * The XLR connects to a is balanced low impedance input stage with a lot of gain. | ||
| + | * The ¼ inch input is unbalanced, has about 20 dB less overall gain but a very high input impedance. | ||
Q: What is the input impedance of the ¼ inch Channel 1 or Channel 2 Inputs | Q: What is the input impedance of the ¼ inch Channel 1 or Channel 2 Inputs | ||
| + | |||
A: Approximately 1 megOhm. | A: Approximately 1 megOhm. | ||
| + | Here is an illustration that may help. | ||
[[Image:SignalFlow2.gif]] | [[Image:SignalFlow2.gif]] | ||
Revision as of 00:19, 11 December 2006
Signal Flow
Q: What happens to my input on Channel 1 or 2 as it flows through the PS1 Power Stand (Classic) / Model I?
A: As provided by Kyle-at-Bose [1]
- Input Line (¼ inch) or XLR input
- Trim
- R1 Remote Channel Level
- Insert Loop
- R1 Remote EQ
- Preset Processing
- Crossover
- L1 Cylindrical Radiator® loudspeaker and B1 Bass Module if B1 is present or
- L1 Cylindrical Radiator® loudspeaker and Bass Line-Out if something is inserted in Bass Line-Out
- Master Level
Preamps
Q: Do I get the benefits of the Preamps if I use the ¼ inch inputs on the PS1 Power Stand (Classic) / Model I Channel 1 or 2
A: Yes. Whether or you use the Input Line (¼ inch) or XLR input the signal flows through the Preamp.
Hilmar-at-Bose provided this:[2]
Both XLR and ¼ inch input go through the same preamp but they see a little different conditioning before they get there.
- The XLR connects to a is balanced low impedance input stage with a lot of gain.
- The ¼ inch input is unbalanced, has about 20 dB less overall gain but a very high input impedance.
Q: What is the input impedance of the ¼ inch Channel 1 or Channel 2 Inputs
A: Approximately 1 megOhm.
Here is an illustration that may help.
- ↑ Kyle-at-Bose in the Bose Musicians Discussion Boards
- ↑ Hilmar-at-Bose in the Bose Musicians Discussion Boards