Pedal Steel Guitar

From Bose Portable PA Encyclopedia
Revision as of 14:11, 6 November 2008 by ST (talk | contribs) (first ed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Brian Terry provided this information about his settings with his Pedal Steel Guitar and his L1 Model II and T1 ToneMatch Audio Engine.

Hi guys, I did purchase L1 model 2 with Tone match and I'm very impressed and as promised here are my settings I'm currently experimenting with, But PLEASE NOTE that I'm using a Peavey Profex 11 with Newmans, Larry Sasser Settings and Mullen S10 Royal Precision pedal Steel with Goodrich vol pedal So here goes

  • Preset Rickenbaker 4001 bass
  • ZEQ low 5.8 Mid 3.8 High 10.4
  • Para EQ level 1.8 Freq 1.65 width2.07
  • Comp Gate thresh .76 Speed 50%
  • Delay Digital Mix 19% Time 57 ms
  • Reverb Mix 19% Bright 91%
  • Reverb Type Medium Room Time 1.7 Bal 50%

Regards Brian Terry


Original post Bose amp System for Pedal Steel Guitar

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Pedal_Steel_Guitar&oldid=9135"