Search results

Jump to: navigation, search

Page title matches

Page text matches

  • <td valign="top">{{:Cables for the L1® Family of Products}} ...are noted in the [[L1® Model I / FAQ|Bose FAQs]] as the source for longer cables for the {{B1}}s. You can read about how Mark Hellinger there worked with
    12 KB (2,058 words) - 05:45, 26 March 2017
  • === Base Module Cables (B1 and B2) === == Use the B2 Cables ==
    8 KB (1,239 words) - 15:12, 25 May 2021
  • What does it mean to have "balanced" vs. "unbalanced" cables and connections? ...might exist between the 'sender' and the 'receiver' -- and the longer the cables, the more of a problem the "induced noise" might be.
    8 KB (1,420 words) - 22:59, 18 July 2007
  • == Use the B1 Cables == == Check the Cables ==
    10 KB (1,586 words) - 00:10, 17 February 2019
  • * Musical instruments and associated cables and accessories * Microphone cable: yes they will likely have microphone cables you can use (see Note at end of list).
    5 KB (893 words) - 05:16, 26 March 2017
  • *Have a variety of spare cables ==Have a variety of spare cables==
    4 KB (686 words) - 05:01, 29 January 2019
  • ...annels 1 or 2 of the power stand. These connectors require standard insert cables with 1/4" TRS connections on one end and dual male 1/4" TS connectors on th ...nd to their R1 remote control, Hosa Technology, Inc., manufactures 25-foot cables. These sell at [http://www.musiciansfriend.com/ www.MusiciansFriend.com] (P
    60 KB (9,859 words) - 05:33, 26 March 2017
  • ...the A1, two B1 soft gig bags, one ¼" TRS cable, 20" long (0.5 m), two B1 cables, power cord and owner<nowiki>’</nowiki>s guides. * Two B1 bass module 4*wire cables (5 ft)
    17 KB (2,728 words) - 05:42, 26 March 2017
  • === Cables for the {{L1 nl}} family of products === Cables specifically selected for use with the T1®, Compact, B1, B2, Model I, Mode
    4 KB (543 words) - 13:10, 5 June 2015
  • === Can you use 2-wire Speakon® cables for the B1 bass modules? === No. Only 4-wire Speakon® cables should be used with the power stand. The additional two wires (<nowiki>+</n
    42 KB (6,832 words) - 05:25, 26 March 2017
  • <p>When used with ToneMatch cables, connect the outputs of the T4S to one or two L1 Model 1S/II units via thei ...rs, amplifiers or recording devices. Aux outputs accept ¼” TRS balanced cables.</p>17" 18" 18
    23 KB (3,780 words) - 01:32, 8 February 2018
  • * Use XLR Female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve cables (XLR to Kemper, 1/4 inch (6.3 mm) Tip-Ring-Sleeve to L1 Pro) * Use 1/4 inch (6.3mm) Tip-Sleeve to 1/4 inch (6.3 mm) Tip-Sleeve cables from any Kemper 1/4-inch output to any L1 Pro 1/4-inch input
    5 KB (706 words) - 01:49, 5 January 2023
  • ...ccepting either balanced XLR audio cables or 1/4" TS unbalanced phone plug cables. ...onnects B1 bass modules to L1 Model II or Model II power stands. Longer B1 cables may be obtained from [http://www.audiopile.net www.audiopile.net].
    31 KB (4,908 words) - 04:28, 9 April 2017
  • ...e switched to mono this should work well. You can used &frac14; inch jack cables. Balanced or unbalanced will work fine. === &frac14; inch jack Cables ===
    2 KB (245 words) - 06:42, 26 March 2017
  • <noinclude>Warning - Use Blue NL4 cables that came with your {{B1}} or {{B2}} bass module</noinclude> <includeonly>''' Warning - Use Blue B1 Cables NL4 cables with your {{Classic}} / {{Model I}} / {{Model 1S}} {{Model II}} '''</includ
    1 KB (217 words) - 11:37, 9 October 2019
  • ...XLR balanced cables for microphones, or ¼" TRS balanced or TS unbalanced cables for high-impedance inputs such as guitars</p></li> ...Preamp outputs for channels 1-3. Accepts ¼" TRS balanced or TS unbalanced cables</p></li>
    6 KB (989 words) - 01:51, 2 December 2018
  • ...point, most people would put the T1® on the bracket and attach the other cables. ...1® before I put it on the bracket. I do it this way because I have all my cables strapped to the microphone stand (I don't take them off between gigs). So t
    2 KB (397 words) - 05:11, 26 March 2017
  • ...sound dropping out and resuming you may want to double check your blue B1 cables. === Replacement and Longer Cables ===
    2 KB (268 words) - 11:32, 28 January 2024
  • * Line 6 Bass PodXT w/cables / The Jester * 3 Audix OM5 with stands, clips, and 20' cables / Bose
    4 KB (568 words) - 18:35, 26 March 2017
  • When talking about cables the terms Stereo, Mono, Balanced, Unbalanced refer to applications (how a c ...nced lines are generally best for long cable runs. XLR and Tip-Ring-Sleeve cables are used to transmit balanced audio from one balanced device to another.
    8 KB (1,267 words) - 17:43, 7 February 2023

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)