Difference between revisions of "T1 ToneMatch® Audio Engine / Aux to a Separate System"
m |
m (ST moved page T1 ToneMatch® Audio Engine / Aux to a Separate System to T1 ToneMatch® Audio Engine / Aux to a Separate System) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | <big>''' '''</big> | + | [[Image:T1Aux.png|right|T1™ Aux]] |
| + | <big>'''Using Aux to send a signal exclusively to a second System'''</big> | ||
Using a {{T1}} with two {{L1}}s, you may want to send an input to one System, but not the other. | Using a {{T1}} with two {{L1}}s, you may want to send an input to one System, but not the other. | ||
In this example, we are taking an input in Channel 3, and sending it to Aux, and '''not''' to Main. | In this example, we are taking an input in Channel 3, and sending it to Aux, and '''not''' to Main. | ||
| − | # Set the Selector to Aux | + | # Set the Selector to Aux <br />[[Image:T1Aux.png]]<br /> |
| − | [[Image:T1Aux.png]] | + | # Press CH Edit for Channel 3 <br /> [[Image:T1AuxSplit00.png]]<br /> |
| − | <br /> | + | # Press button 1 to enable Aux <br /> [[Image:T1AuxSplit03.png]]<br /> |
| − | # Press CH Edit for Channel 3 <br /> [[Image:T1AuxSplit00.png]] | + | # Press button 2 to see the Tap menu <br /> [[Image:T1AuxSplit04.png]]<br /> |
| − | # Press button 1 to enable Aux <br /> [[Image:T1AuxSplit03.png]] | + | # Turn the Tap setting to '''Pre: With EQ & FX'''. Press the button to Select. <br /> [[Image:T1AuxSplit05.png]]<br /> |
| − | # Press button 2 to see the Tap menu <br /> [[Image:T1AuxSplit04.png]] | + | # Set the Channel Volume to 0 (zero). <br />I set the Volume to 0 to avoid unwanted consequences of accidentally hitting Mute. Just to be safe, I also Mute the channel. <br /> [[Image:T1AuxSplit06.png]]<br /> |
| − | # Turn the Tap setting to '''Pre: With EQ & FX'''. Press the button to Select. <br /> [Image:T1AuxSplit05.png]] | + | # Adjust Aux Volume if necessary. <br />You will probably end up at or near 100% <br />[[Image:T1AuxSplit02.png]]<br /> |
| − | # Set the Channel Volume to 0 (zero) | ||
| − | # Adjust Aux Volume if necessary <br />[[Image:T1AuxSplit02.png]] | ||
---- | ---- | ||
[[Category:T1]] | [[Category:T1]] | ||
[[Category:T1Aux]] | [[Category:T1Aux]] | ||
Latest revision as of 04:29, 26 March 2017
Using Aux to send a signal exclusively to a second System
Using a T1 ToneMatch Audio Engine with two L1 s, you may want to send an input to one System, but not the other.
In this example, we are taking an input in Channel 3, and sending it to Aux, and not to Main.
- Set the Selector to Aux
- Press CH Edit for Channel 3
- Press button 1 to enable Aux
- Press button 2 to see the Tap menu
- Turn the Tap setting to Pre: With EQ & FX. Press the button to Select.
- Set the Channel Volume to 0 (zero).
I set the Volume to 0 to avoid unwanted consequences of accidentally hitting Mute. Just to be safe, I also Mute the channel.
- Adjust Aux Volume if necessary.
You will probably end up at or near 100%
