T1 ToneMatch® Audio Engine to Two Model II Power Stands

Please note: Bose recommends that if you have two L1® Systems using the same source, that the L1®s be placed at least 20 feet apart (6 meters). This is to avoid [Multiple_Source_Interference]Multiple Source Interference]

1. Connect the first system with the ToneMatch cable that came with the T1®.
   • T1® ToneMatch port to Model II Power Stand ToneMatch port.

1. Connect the second system with a ¼ inch jack Tip-Ring-Sleeve cable
   • T1® Master Output to Model II Power Stand Analog input
     • For best results use a Tip-Ring-Sleeve (balanced) connection.
       
       You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred).

---