Difference between revisions of "T8S and T1 with L1 and F1 Model 812"
(Created page with "There is an active discussion in the Bose Portable PA Community. [https://www.bosepro.community/g/portable/topic/t1-and-t8 T8S and T1 with L1 and F1 Model 812] ---- Catego...") |
m |
||
| Line 2: | Line 2: | ||
[https://www.bosepro.community/g/portable/topic/t1-and-t8 T8S and T1 with L1 and F1 Model 812] | [https://www.bosepro.community/g/portable/topic/t1-and-t8 T8S and T1 with L1 and F1 Model 812] | ||
| + | |||
| + | ;Requirement | ||
| + | * T1 being used for extra inputs | ||
| + | * T1 must be connected to T8S | ||
| + | * T8S, all channels used | ||
| + | * Monitor output to L1 for stage monitoring | ||
| + | * Front of House Output to two F1 Model 812 systems | ||
| + | |||
| + | ;Summary | ||
| + | * If you are using a T1 and T8S connect the T1 Master Output to T8S Channel 9 or 10 (one of the Aux inputs) | ||
| + | * Power the T1 using a ToneMatch Power Supply (not the L1) | ||
| + | * T8S Aux 1 (if reverb required) or Aux 2 or 3 or 4 (if no reverb required) | ||
| + | * T8S Master Outputs to F1 Model 812s | ||
| + | ** [[T8S to F1 Model 812 XLR Connection]] | ||
| + | ** [[T8S to F1 Model 812 Tip Ring Sleeve Connection]] | ||
---- | ---- | ||
[[Category:T8S]] | [[Category:T8S]] | ||
[[Category:T1]] | [[Category:T1]] | ||
Latest revision as of 10:03, 29 July 2018
There is an active discussion in the Bose Portable PA Community.
T8S and T1 with L1 and F1 Model 812
- Requirement
- T1 being used for extra inputs
- T1 must be connected to T8S
- T8S, all channels used
- Monitor output to L1 for stage monitoring
- Front of House Output to two F1 Model 812 systems
- Summary
- If you are using a T1 and T8S connect the T1 Master Output to T8S Channel 9 or 10 (one of the Aux inputs)
- Power the T1 using a ToneMatch Power Supply (not the L1)
- T8S Aux 1 (if reverb required) or Aux 2 or 3 or 4 (if no reverb required)
- T8S Master Outputs to F1 Model 812s