Difference between revisions of "Template:T8S to L1 Pro"
m |
m |
||
| Line 1: | Line 1: | ||
<noinclude></noinclude> | <noinclude></noinclude> | ||
| + | === T8S to Single {{L1P}}=== | ||
There is a single ToneMatch port on the {{T8S}}. You can use this | There is a single ToneMatch port on the {{T8S}}. You can use this | ||
* To connect to an {{L1P}} ToneMatch Port using a [[ToneMatch Cable]] [[File:ToneMatch Cable.jpg|thumb|ToneMatch cable|link=ToneMatch_Cable]] or Network Cable [[File:Cat5.jpg|thumb|Network cable|link=ToneMatch_Cable#CAT5_or_CAT6_or_CAT7_or_CAT8_cable]] | * To connect to an {{L1P}} ToneMatch Port using a [[ToneMatch Cable]] [[File:ToneMatch Cable.jpg|thumb|ToneMatch cable|link=ToneMatch_Cable]] or Network Cable [[File:Cat5.jpg|thumb|Network cable|link=ToneMatch_Cable#CAT5_or_CAT6_or_CAT7_or_CAT8_cable]] | ||
| Line 9: | Line 10: | ||
To run stereo, connect the second powered loudspeaker to one of the {{T8S}} RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the second L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the {{T8S}} outputs is too hot for the L1 Pro XLR inputs. | To run stereo, connect the second powered loudspeaker to one of the {{T8S}} RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the second L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the {{T8S}} outputs is too hot for the L1 Pro XLR inputs. | ||
| − | [[File:XLR Female to TRS.jpg]] | + | [[File:XLR Female to TRS.jpg|400px]] |
| Line 16: | Line 17: | ||
* ToneMatch port on the {{T8S}} to [[ToneMatch Power Supply]] for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the {{T8S}} outputs is too hot for the L1 Pro XLR inputs. | * ToneMatch port on the {{T8S}} to [[ToneMatch Power Supply]] for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the {{T8S}} outputs is too hot for the L1 Pro XLR inputs. | ||
| − | [[File:XLR Female to TRS.jpg]] | + | [[File:XLR Female to TRS.jpg|400px]] |
| + | === {{T8S}} to Two Single {{L1P}} Stereo === | ||
| + | |||
| + | |||
| + | === {{T8S}} to Two Single {{L1P}} Mono === | ||
| + | {{L1 Pro Daisy Chain}} | ||
Revision as of 21:24, 27 March 2022
T8S to Single L1 Pro[1]
There is a single ToneMatch port on the T8S ToneMatch mixer. You can use this
- To connect to an L1 Pro[1] ToneMatch Port using a ToneMatch Cable or Network Cable
- Note: This is the mixer LEFT output. Anything panned hard RIGHT will not be heard.
All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.
To run stereo, connect the second powered loudspeaker to one of the T8S ToneMatch mixer RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the second L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the T8S ToneMatch mixer outputs is too hot for the L1 Pro XLR inputs.
- Alternate connection
- ToneMatch port on the T8S ToneMatch mixer to ToneMatch Power Supply for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the T8S ToneMatch mixer outputs is too hot for the L1 Pro XLR inputs.
T8S ToneMatch mixer to Two Single L1 Pro[1] Stereo
T8S ToneMatch mixer to Two Single L1 Pro[1] Mono