Difference between revisions of "L1® Family Comparisons"
m (→L1 Pro16) |
m (→L1 Pro16) |
||
Line 56: | Line 56: | ||
{{#lst:F1 Model 812 Flexible Array Loudspeaker|F1 Weight}} | {{#lst:F1 Model 812 Flexible Array Loudspeaker|F1 Weight}} | ||
− | == L1 Pro16 == | + | === L1 Pro16 === |
The total assembled system weight 54.8 lb (24.8 kg) | The total assembled system weight 54.8 lb (24.8 kg) | ||
Revision as of 19:24, 11 April 2021
Comparisons of Current Models
What Model Do I Have?How to Tell the Difference Between Bose Portable PA ModelsThis is how to tell which L1®, S1 Pro, or F1 unit you have.
|
Model 1S and Model II
Power Stands
Model 1S Model II Cylindrical Radiators
Top Section
Top sections are physically identical (same dimensions).
Note: The actual model designation is on the label on the back channel.
- Top array 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model 1S has silver background
- Model II has black background
Lower Section
Lower sections are physically different (Model 1S is 3.9" shorter).
- Model 1S is approximately 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0 mm x 9.0 cm x 10.5 cm)
- Close up view of the ends (Model 1S on top, Model II below)
- Top caps are identical
Questions
Q: Can I use the Model 1S lower extension (no drivers) in the Model II with the Model II Cylindrical Radiator® top section?
- A: No. No sound will come out from the top section.
Vertical Dispersion
L1 Model 1S Compared to L1 Model II Vertical Dispersion
Discussions
Difference in capacity from Two Bose L1 model 1S vs One L1 Model II_ _ Bose Portable PA _ Bose Pro
L1 Model 1S Versus a Model II, both with 1 B2 _ Bose Portable PA _ Bose Pro
Comparisons of Older Models
- L1® Portable Line Array Systems Quick Product Comparison Guide Compact / Model I / Model II 2009
- Compact : Classic/Model I : Model II
- Classic/Model I compared to Model II - stage monitoring
What Can I Use with What?
Cylindrical Radiator®s
Cylindrical Radiator®s are not interchangeable across models
Specifically (and without exception)
- The Cylindrical Radiator speaker sections of the L1 Classic, the L1 Model I and L1 Model 1S and the L1 Model II are not compatible with each other.
- The Cylindrical Radiator speaker sections of the L1 Classic can only be used with the Classic PS1 power stand (no orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model I (orange markings on the back of both sections) can only be used with the Model I PS1 power stand (orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model II can only be used with the L1 Model II power stand.
- The Cylindrical Radiator speaker sections of the L1 Model 1S can only be used with the L1 Model 1S power stand.
T1 ToneMatch® Audio Engine, T4S/T8S ToneMatch® Mixers
- The ToneMatch mixers can be used with the
PackLite® power amplifier Model A1
- The PackLite® power amplifier model A1 can be used with
B1 Bass Module
- The B1 Bass Module can be used with the
B2 Bass Module
- The B2 Bass Module can be used with the
- L1 Classic Normal Mode only
- L1 Model I Normal Mode only
- L1 Model 1S all modes
- L1 Model II all modes but L1® Model II Power Stand Firmware version 1.4 or later required
System Heights
System Heights - shortest to longest
Model | Height Inches | Height mm | ||
---|---|---|---|---|
Compact (collapsed) | 16.5" | 418 mm | ||
F1 Model 812 | 26.5" | 665 mm | ||
F1 Subwoofer | 27.0" | 688 mm | ||
F1 system stack | 73.5" | 1868 mm | ||
Compact | 78.5" | 1995 mm | ||
L1 Pro8 | 78.9" | 2005 mm | longest section 36" | Cylindrical Radiator case length 37" |
L1 Pro16 | 79.2" | 2012 mm | longest section 42.75" | Cylindrical Radiator case length 45.5" |
Model 1S | 79.4" | 2018 mm | ||
Model I / Classic | 82.75" | 2074 mm | ||
Model II | 84.0" | 2134 mm | longest section 44" | Cylindrical Radiator case length 45" |
L1 Pro32 | 84.1" | 2135 mm | longest section 44" | Cylindrical Radiator case length 45.5" |
System Weights
The following are arranged from lightest to heaviest.
L1 Compact
The total assembled system weight 29.2 lb (13.3 kg)
L1 Pro8
The total assembled system weight 39.8 lb (18.0 kg)
F1 Model 812 Flexible Array Loudspeaker
F1 Model 812 loudspeaker: 44.5 lbs (20.18 kg)
F1 system stack: 99.5 lbs (45.7 kg)
L1 Pro16
The total assembled system weight 54.8 lb (24.8 kg)
L1 Pro32
The total assembled system weight with Sub1 64.1 lb (29.1 kg)
The total assembled system weight with Sub2 80.2 lb (36.4 kg)
L1 Model 1S
The total assembled system weight with the B1 bass module 76 lb (34.4 kg).
The total assembled system weight with the B2 bass module 94 lb (42.6 kg).
L1 Model II
The total assembled system weight with the B1 bass module 84 lb (38.10 kg).
The total assembled system weight with the B2 bass module 102 lb (46.2 kg).
L1 Classic
The total assembled system weight with the B1 bass module 94 lb (42.6 kg)
The total assembled system weight with two B1 bass module 122 lb (55.3 kg)
- Note - the early B1 weighed 28 pounds
L1 Model I
The total assembled system weight with the B1 bass module 97 lb (43.00 kg)
The total assembled system weight with two B1 bass module 123 lb (55.8 kg)
Bass Modules
B1 bass module: 25.1 lb (11.4 kg)[1]
- Early version was 28 lb [2]
B2 bass module: 45 lb (20.41 kg)
- ↑ B1 bass module weight 25.1 L1® Model 1S System Owner's Guide
- ↑ B1 bass module weight 25.1 B1 - New/Old