Difference between revisions of "L1® Family Comparisons"
m (→Model 1S and Model II) |
m |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 75: | Line 75: | ||
The total assembled system weight with Sub1 64.1 lb (29.1 kg) | The total assembled system weight with Sub1 64.1 lb (29.1 kg) | ||
| − | The total assembled system weight with Sub2 | + | The total assembled system weight with Sub2 79.3 lb (36.4 kg) |
=== {{Model 1S}} === | === {{Model 1S}} === | ||
| Line 115: | Line 115: | ||
=== Subwoofers === | === Subwoofers === | ||
| − | Sub1 | + | Sub1 34.1 lb (16.1 kg) |
| − | Sub2 | + | Sub2 50.7 lb (23.4 kg) |
F1 Subwoofer 57 lb (25.9 kg) | F1 Subwoofer 57 lb (25.9 kg) | ||
Latest revision as of 15:26, 23 September 2023
Comparisons of Current Models
Legacy to L1 Pro Models
Throw Over Distance a comparison of all models. What Model Do I Have?How to Tell the Difference Between Bose Portable PA ModelsThis is how to tell which L1®, S1 Pro, or F1 unit you have.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Throw Over Distance
Summary
These are projections and estimates based on previously published data from Bose.
Assumptions:
- All values are calculated at 2 kHz
- S1 Pro, L1 Compact, L1 Pro8, F1 Model 812 have a critical distance[1] of 0 meters/feet[2]
- L1 Model 1S and L1 Pro16 have a critical distance[1] of approximately 3 meters (10 feet)[2]
- L1 Model II and L1 Pro32 have a critical distance[1] of approximately 10 meters (33 feet)[2]
Comments and discussion at Twitter @ST_Muso or LinkedIn STPro
L1 Pro Throw Over Distance
This is the chart used to estimate critical distance and drop-off over distance. The source is 13:25 Which L1 Pro Portable System is Right for You?
L1 Pro Compared to L1 Legacy
Assuming that all systems are run at their rated maximum outputs:
- L1 Pro8 will be +6 dB SPL higher than the L1 Compact at any distance
- L1 Model 1S will be +3 dB SPL higher than the L1 Pro8 at any distance
- L1 Pro16 will be +6 dB SPL higher than the L1 Model 1S (beyond 2 meters)
- L1 Model II will be +3 dB SPL higher than the L1 Pro16 (beyond 4 meters)
- L1 Pro32 will be +7 to +10 dB SPL higher than the L1 Pro16 (beyond 4 meters)
- L1 Pro32 will be +7 dB SPL higher than the L1 Model II at any distance
The table below is adapted from the chart from Bose[2] and previously published data.
All Models
Assuming that all systems are run at their rated maximum outputs:
- L1 Compact will be +6 dB SPL higher than the S1 Pro at any distance
- L1 Pro8 will be +6 dB SPL higher than the L1 Compact at any distance
- L1 Model 1S will be +3 dB SPL higher than the L1 Pro8 at any distance
- L1 Pro16 will be +6 dB SPL higher than the L1 Model 1S (beyond 2 meters)
- L1 Model II will be +3 dB SPL higher than the L1 Pro16 (beyond 4 meters)
- L1 Pro32 will be +7 dB SPL higher than the L1 Model II at any distance
- F1 812 is +4 dB SPL higher than the L1 Pro32 but the drop-off over distance is greater. The result: Beyond 6 meters (20 feet) the L1 Pro32 has higher SPL.
The table below is adapted from the chart from Bose[2] and previously published data.
Model 1S and Model II
Power Stands
Model 1S Model II Cylindrical Radiators
Top Section
Top sections are physically identical (same dimensions).
Note: The actual model designation is on the label on the back channel.
- Top array 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model 1S has silver background
- Model II has black background
Lower Section
Lower sections are physically different (Model 1S is 3.9" shorter).
- Model 1S is approximately 39.63” H x 4.15” W x 4.13” D (100.6 cm x 10.6 cm x 10.5 cm)
- Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0 mm x 9.0 cm x 10.5 cm)
- Close up view of the ends (Model 1S on top, Model II below)
- Top caps are identical
Questions
Q: Can I use the Model 1S lower extension (no drivers) in the Model II with the Model II Cylindrical Radiator® top section?
- A: No. No sound will come out from the top section.
Vertical Dispersion
L1 Model 1S Compared to L1 Model II Vertical Dispersion
Discussions
Difference in capacity from Two Bose L1 model 1S vs One L1 Model II_ _ Bose Portable PA _ Bose Pro
L1 Model 1S Versus a Model II, both with 1 B2 _ Bose Portable PA _ Bose Pro
Comparisons of Older Models
- L1® Portable Line Array Systems Quick Product Comparison Guide Compact / Model I / Model II 2009
- Compact : Classic/Model I : Model II
- Classic/Model I compared to Model II - stage monitoring
What Can I Use with What?
Cylindrical Radiator®s
Cylindrical Radiator®s are not interchangeable across models
Specifically (and without exception)
- The Cylindrical Radiator speaker sections of the L1 Classic, the L1 Model I and L1 Model 1S and the L1 Model II are not compatible with each other.
- The Cylindrical Radiator speaker sections of the L1 Classic can only be used with the Classic PS1 power stand (no orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model I (orange markings on the back of both sections) can only be used with the Model I PS1 power stand (orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model II can only be used with the L1 Model II power stand.
- The Cylindrical Radiator speaker sections of the L1 Model 1S can only be used with the L1 Model 1S power stand.
T1 ToneMatch® Audio Engine, T4S/T8S ToneMatch® Mixers
- The ToneMatch mixers can be used with the
PackLite® power amplifier Model A1
- The PackLite® power amplifier model A1 can be used with
B1 Bass Module
- The B1 Bass Module can be used with the
B2 Bass Module
- The B2 Bass Module can be used with the
- L1 Classic Normal Mode only
- L1 Model I Normal Mode only
- L1 Model 1S all modes
- L1 Model II all modes but L1® Model II Power Stand Firmware version 1.4 or later required
System Heights
System Heights - shortest to longest
| Model | Height Inches | Height mm | ||
|---|---|---|---|---|
| Compact (collapsed) | 16.5" | 418 mm | ||
| F1 Model 812 | 26.5" | 665 mm | ||
| F1 Subwoofer | 27.0" | 688 mm | ||
| F1 system stack | 73.5" | 1868 mm | ||
| Compact | 78.5" | 1995 mm | ||
| L1 Pro8 | 78.9" | 2005 mm | longest section 36" | Cylindrical Radiator case length 37" |
| L1 Pro16 | 79.2" | 2012 mm | longest section 42.75" | Cylindrical Radiator case length 45.5" |
| Model 1S | 79.4" | 2018 mm | ||
| Model I / Classic | 82.75" | 2074 mm | ||
| Model II | 84.0" | 2134 mm | longest section 44" | Cylindrical Radiator case length 45" |
| L1 Pro32 | 84.1" | 2135 mm | longest section 44" | Cylindrical Radiator case length 45.5" |
System Weights
The following are arranged from lightest to heaviest.
L1 Compact
The total assembled system weight 29.2 lb (13.3 kg)
L1 Pro8
The total assembled system weight 39.8 lb (18.0 kg)
F1 Model 812 Flexible Array Loudspeaker
F1 Model 812 loudspeaker: 44.5 lbs (20.18 kg)
F1 system stack: 99.5 lbs (45.7 kg)
L1 Pro16
The total assembled system weight 54.8 lb (24.8 kg)
L1 Pro32
Power Stand 28.7 lb (13 kg)
The total assembled system weight with Sub1 64.1 lb (29.1 kg)
The total assembled system weight with Sub2 79.3 lb (36.4 kg)
L1 Model 1S
The total assembled system weight with the B1 bass module 76 lb (34.4 kg).
The total assembled system weight with the B2 bass module 94 lb (42.6 kg).
L1 Model II
The total assembled system weight with the B1 bass module 84 lb (38.10 kg).
The total assembled system weight with the B2 bass module 102 lb (46.2 kg).
L1 Classic
The total assembled system weight with the B1 bass module 94 lb (42.6 kg)
The total assembled system weight with two B1 bass module 122 lb (55.3 kg)
- Note - the early B1 weighed 28 pounds
L1 Model I
The total assembled system weight with the B1 bass module 97 lb (43.00 kg)
The total assembled system weight with two B1 bass module 123 lb (55.8 kg)
Bass Modules
B1 bass module: 25.1 lb (11.4 kg)[3]
- Early version was 28 lb [4]
B2 bass module: 45 lb (20.41 kg)
Subwoofers
Sub1 34.1 lb (16.1 kg)
Sub2 50.7 lb (23.4 kg)
F1 Subwoofer 57 lb (25.9 kg)
- ↑ 1.0 1.1 1.2 Distance at which the loudspeaker behaves as a point-source with drop-off over distance of -6 dB SPL for every doubling of distance
- ↑ 2.0 2.1 2.2 2.3 2.4 Critical distances for L1 Pro8/Pro16/Pro32 Source: 13:25 Which L1 Pro Portable System is Right for You?
- ↑ B1 bass module weight 25.1 L1® Model 1S System Owner's Guide
- ↑ B1 bass module weight 25.1 B1 - New/Old