Search results

Jump to: navigation, search

Create the page "Settings" on this wiki! See also the search results found.

Page title matches

Page text matches

  • T4S/T8S ToneMatch® Mixer
    ...ge. This is normal operation. If you want to run the trim control at lower settings we recommend using a preamp or simple stomp box level booster. ;Note: Routing settings for USB from PC are also applied to USB A playback. See [[{{PAGENAME}}#USB
    9 KB (1,484 words) - 23:55, 13 December 2023
  • L1® Model I / FAQ
    ...system, made adjustments to improve the sound quality and then saved those settings as ToneMatch presets. Now the high level of tone customization most musicia There are three gain settings for the primary channels (1 and 2) and two gain settings for the secondary channels (3 and 4). To set the gain for the primary chann
    60 KB (9,859 words) - 05:33, 26 March 2017
  • T1 ToneMatch® Audio Engine / Digital Delay for Second L1®
    ;Update: The principles and settings shown in this article apply equally to the {{T1}} and {{ToneMatch Mixers}} == Connections and Settings ==
    12 KB (2,012 words) - 10:58, 5 January 2023
  • Kemper Profiler
    === Wah Settings === ...sheets/d/1uR_aaV5FjKoCtRR8Vqhuu6H4CFyzkFlE1oC10ahN2PE/edit?usp=sharing Wah Settings Spreadsheet]
    24 KB (3,721 words) - 12:54, 8 August 2023
  • Tonematch Mixers / Compressor
    <noinclude>[[Image:T1CompGate.png|right|screen shot of T1™ Comp/Gate settings]] Note: To bypass the Comp/Gate settings, press the Type button. Press it again to activate.
    7 KB (1,047 words) - 15:58, 16 June 2019
  • Sennheiser EW-D
    ==Settings== Recommended settings for a unity gain link:
    5 KB (897 words) - 14:39, 13 April 2022
  • Is the B2 Bass Module Compatible with the L1® Classic or Model I
    If you have a Classic, you will get sound in all three settings, but only '''Normal''' is supported. The other two do not convey any value There are three settings:
    7 KB (1,259 words) - 08:44, 26 March 2017
  • S1 Pro as Monitor with Third Party Mixer and L1
    ==== {{S1}} Settings ==== [[File:S1 Pro Settings for mixer.jpg|250px|S1 Pro inputs]]
    2 KB (357 words) - 22:23, 16 November 2019
  • L1® T1 ToneMatch® Audio Engine / FAQ
    ...tions. Five Bose scenes are built into the ToneMatch audio engine: Factory settings, Singer/songwriter, DJ/playback, Drums and bass, and Electric works. ...ene is a "snapshot" of the complete state of the T1 ToneMatch audio engine settings at any given moment. You can store, recall and edit up to five different us
    31 KB (4,908 words) - 04:28, 9 April 2017
  • R1 Remote
    ...d the user then disconnects the R1 remote control, it will retain the last settings of the R1 remote control before you disconnected it. This is helpful in the '''Hint:''' Many players find it helpful to note their gain settings -- trim on the PS1, channel volume and master volume on the R1 -- and make
    11 KB (1,902 words) - 15:41, 23 April 2017
  • T1 ToneMatch® Audio Engine Reset to Factory Settings
    Sometimes you want to start fresh and restore your T1® to the settings when it left the factory. # Under the display, turn first knob until you see Factory Settings <br>
    709 bytes (108 words) - 16:48, 11 January 2020
  • T1 to T8S to Two L1 Model II
    ...er inputs. You will need to control T1 Pan and Level using the T8S PAN/AUX settings. === {{T8S}} PAN/AUX Input Settings ===
    2 KB (290 words) - 12:39, 10 October 2019
  • S1 Pro as Monitor with T1
    [[File:S1 Pro Settings for mixer.jpg|250px|S1 Pro inputs]] =={{S1}} settings==
    3 KB (433 words) - 22:23, 16 November 2019
  • Hammered Dulcimer
    ===Settings for EQ and compression=== EQ settings for the HD can vary a bit with each gig, though they are generally close to
    4 KB (633 words) - 15:56, 14 October 2008
  • DJ
    If you have a {{T1}} these settings can be used in conjunction with all of the other suggestions below. === Settings USB from Computer to Channel 4/5 ===
    5 KB (788 words) - 06:27, 2 December 2018
  • T4S ToneMatch Mixer to S1 Pro system
    == T4S Settings == == S1 Pro Settings ==
    3 KB (510 words) - 17:52, 2 May 2022
  • Troubleshooting
    If you have all settings on the {{PS1}} set straight-up (including the {{R1}}), with nothing connect ...mely'' loud. When you provide an input signal source with appropriate trim settings the hiss should be inaudible.
    7 KB (1,133 words) - 16:32, 13 October 2010
  • Gig Report / House Concert Fundraiser
    The {{T1r}} Scenes made it easy to switch between settings for the different acts. ...had arrived early, found the {{T1r}}, figured it out, and tweaked all the settings before I got there. All I did was suggest some different Presets to try for
    9 KB (1,752 words) - 19:00, 4 January 2009
  • Pedal Steel Guitar
    Brian Terry provided this information about his settings with his Pedal Steel Guitar and his {{Model II}} and {{T1}}. ...t PLEASE NOTE that I'm using a Peavey Profex 11 with Newmans, Larry Sasser Settings and Mullen S10 Royal Precision pedal Steel with Goodrich vol pedal So here
    2 KB (257 words) - 02:35, 21 May 2013
  • L1® Compact
    ==== Differences in Volume Settings ==== ...l from say a Model II to an L1 Compact system with no additional change of settings on the T1.
    27 KB (4,306 words) - 01:35, 20 May 2021
  • Recording USB Dry
    ...nd a DRY (without any effects) signal to the computer while retaining any settings you prefer to hear for monitoring or performance. * Set Aux settings as shown here.
    856 bytes (146 words) - 14:45, 7 February 2014
  • ToneMatch Mixer Scenes
    You can save all your ToneMatch Mixer settings as a Scene.&nbsp; Think of it as a snapshot. You can have up to ten User Sc A Scene captures all your settings except input trim and channel and master volume controls.
    1 KB (222 words) - 16:11, 18 April 2023
  • T1 to T8S to L1 Model II
    ...er inputs. You will need to control T1 Pan and Level using the T8S PAN/AUX settings. ...er inputs. You will need to control T1 Pan and Level using the T8S PAN/AUX settings.
    2 KB (333 words) - 11:04, 8 April 2019
  • LR Baggs Session DI to ToneMatch Mixer T1/T4S/T8S
    ...f your acoustic guitar and the input of a mixer or PA system. With the T4S settings set to FLAT/Bypass follow the instructions in the LR Baggs owner's guide to ==LR Baggs Session DI Settings==
    4 KB (656 words) - 15:13, 3 February 2020
  • PorchBoard Floor Bass
    == Settings on the {{L1}} for the PorchBoard == The ToneMatch® settings are
    14 KB (2,215 words) - 14:25, 11 March 2019
  • Presets / ToneMatch® / Downloads
    === Original Factory Settings === {{:T1® / Downloads / Factory Settings}}
    7 KB (1,019 words) - 17:46, 2 September 2022
  • T1 ToneMatch® Audio Engine / USB / Output Stereo to Two L1®s
    ...}. If you have been following along and have set up our {{T1 nl}} with the settings above, you do not need to download this Shared Scene. I just included this This scene has very generic settings for Channels 1,2 and 3 and the settings discussed in this article for Channel 4/5.
    7 KB (1,115 words) - 16:44, 4 September 2023
  • T1 ToneMatch® Audio Engine / Recording / Audacity
    == Audacity Settings == You can record in stereo if you set the project default settings to 48 kHz. If you leave it at the default 44.1 kHz then you can only record
    3 KB (486 words) - 04:54, 26 March 2017
  • Larrivee & Morgan ToneMatch Settings
    Cliff Henricksen suggested that I try these settings for my [[Larrivée C10 BZ 30th Anniversary]] and [http://toonz.ca/guitars/m It should be no surprise that these settings work so well for both of these instruments. They are very similar. The body
    1 KB (226 words) - 14:26, 4 November 2019
  • Fiddle
    ===Settings for EQ and compression=== EQ settings for the fiddle can vary a bit with each gig. The notch to remove the 'scri
    4 KB (691 words) - 15:30, 22 December 2008
  • Larrivée Guitars
    === Settings with {{T1}} === {{:Larrivee & Morgan ToneMatch Settings}}
    3 KB (536 words) - 14:28, 4 November 2019
  • Larrivée C10 BZ 30th Anniversary
    === Settings with {{T1}} === {{:Larrivee & Morgan ToneMatch Settings}}
    2 KB (223 words) - 14:28, 4 November 2019
  • T1 ToneMatch® Audio Engine / USB / Output Stereo to Two F1 Systems
    ...}. If you have been following along and have set up our {{T1 nl}} with the settings above, you do not need to download this Shared Scene. I just included this This scene has very generic settings for Channels 1,2 and 3 and the settings discussed in this article for Channel 4/5.
    5 KB (809 words) - 17:12, 26 December 2017
  • Behringer Xenyx 1002B to S1 Pro System
    == S1 Pro System Settings == {{S1 Pro Mixer Settings}}
    2 KB (443 words) - 22:23, 16 November 2019
  • Mackie Pro FX4 to S1 Pro System
    == S1 Pro System Settings == {{S1 Pro Mixer Settings}}
    1 KB (243 words) - 22:25, 16 November 2019
  • Set ToneMatch Channel to Factory Settings
    ...y) but if you don't want to lose any saved Scenes you can load the Factory Settings Scene (T1/T4S/T8S). This will set all channels to these settings.
    795 bytes (135 words) - 16:47, 11 January 2020
  • T4S to L1 Model 1S
    === T4S Settings === ...single L1 Model II or L1 Model 1S is the RIGHT output. Ensure that the PAN settings for each input are up the center or panned hard right. Any signal panned ha
    511 bytes (94 words) - 01:39, 15 December 2022
  • T4S to L1 Model II
    === T4S Settings === ...single L1 Model II or L1 Model 1S is the RIGHT output. Ensure that the PAN settings for each input are up the center or panned hard right. Any signal panned ha
    508 bytes (90 words) - 01:38, 15 December 2022
  • L1 System for Volunteer Organization
    ...h mixers can store [[ToneMatch Mixer Scenes|Scene]] (a snapshot of all the settings). You can create a Scene, and others can load them to put the ToneMatch mix # Set up all the connections and settings
    2 KB (300 words) - 16:59, 18 April 2023
  • T1 ToneMatch® Audio Engine / USB
    #Factory settings, the default<br>[[Image:T1USBtoPC02a.png|450px]] <noinclude>See: [[{{PAGENAME}}#Settings USB from Computer to Channel 4/5|Settings USB from Computer to Channel 4/5]] (above) for USB setup and [[{{PAGENAME}}
    8 KB (1,290 words) - 18:04, 27 March 2019
  • T1 ToneMatch® Audio Engine / USB Connection
    == Settings for Playback ==
    1 KB (244 words) - 05:08, 26 March 2017
  • T1 ToneMatch® Audio Engine / Use without the L1® in Festival Situations
    ...t signals (direct outs) that are not modified by any changes to the {{T1}} settings (except for the T1 Input Trim controls) * The input Trim control settings should not be changed once they have been set for proper gain staging. Any
    5 KB (893 words) - 05:16, 26 March 2017
  • Fishman SoloAmp / Bose L1® Comparison
    ...into corners and small places. The L1, Model 2 has been wonderful in these settings as I can stand right in front of it and be fine. I don't know that I could ...f people and whether or not I can stand to be close to the SoloAmp in loud settings. So far, I think they both have a spot in my car and in my performing life.
    17 KB (3,271 words) - 18:10, 26 March 2017
  • McIntyre BluesMaker II
    loudness is determined at the console (fader settings, monitor send levels).<br> - Working the controls left to right, make these settings:<br>
    34 KB (5,610 words) - 15:00, 18 January 2021
  • Live Recording Using the T1 ToneMatch® Audio Engine Aux
    === {{t1r}} Settings ===
    7 KB (1,140 words) - 03:23, 26 March 2017
  • Line6 Patches
    guitar, pickup and Bose output settings. All patches are in .l6t the sound. There is much room for the player to alter settings to fit
    10 KB (1,765 words) - 15:55, 4 April 2010
  • Mixer / Yamaha / MG124 CX
    ==== Settings on the L1® Input Panel ====
    2 KB (250 words) - 14:02, 19 September 2012
  • F1 Model 812 Flexible Array Loudspeaker
    ...ded settings when using external processing. The F1 Model 812 uses similar settings. Recommended settings for the EQ selector switches on the F1 Model 812 Loudspeaker and the F1 Sub
    20 KB (3,211 words) - 12:46, 29 September 2023
  • T1 ToneMatch® Audio Engine / Stereo Output to Two F1 Systems
    ===Settings on the T1®===
    7 KB (1,179 words) - 05:03, 26 March 2017
  • T1 ToneMatch® Audio Engine to F1 System
    === General settings ===
    6 KB (1,027 words) - 13:37, 29 October 2019
  • S1 Pro system
    ...your mobile device.<br>Note: The Bluetooth feature is usually found in the Settings menu. *Open Settings, select Bluetooth
    14 KB (2,204 words) - 22:04, 15 September 2021
  • T4S/T8S ToneMatch® Mixer Firmware Updates
    *Adjusting pre-delay settings # Record the settings of any scenes you want to rebuild after the firmware upgrade.
    12 KB (1,725 words) - 19:23, 6 August 2023
  • T4S to Two S1 Pro Systems (Stereo)
    == Initial Settings ==
    2 KB (272 words) - 02:48, 2 September 2018
  • Boss VE-8 to S1 Pro
    == {{S1}} Settings ==
    2 KB (248 words) - 22:21, 16 November 2019
  • T8S to L1 Compact
    === Settings ===
    2 KB (321 words) - 14:13, 9 November 2019
  • L1 Compact to S1 Pro
    Note: The volume settings on the Compact will raise and lower the output to the {{S1}}. Set the volum ;{{S1}} Settings
    2 KB (298 words) - 15:39, 13 June 2020
  • Kemper Profiler Recovery Options
    To reset the (corrupt) Midi settings do like this:<br> To reset the (corrupt) System settings do like this:<br>
    4 KB (666 words) - 19:29, 8 November 2020
  • Mixer to L1 Pro
    == Settings on the L1 Pro ==
    4 KB (677 words) - 00:26, 29 February 2024
  • Bass Outdoors
    ...utdoor settings demand more from your sound system in the bass than indoor settings, because outdoors there is no bass reinforcement from a room. Also, people
    5 KB (995 words) - 12:52, 21 November 2010
  • Gain Staging
    There are three gain settings for the primary channels (1 and 2) and two gain settings for the secondary channels (3 and 4).
    7 KB (1,267 words) - 00:54, 30 November 2016
  • Setup 5 Minutes
    ..." white "first-aid" tape for labelling things (including the presets, gain settings, phantom power on/off normally used for each system). I'll probably get aro
    3 KB (524 words) - 00:28, 23 December 2008
  • Review / Microphone / Various
    Settings: I had the L1&trade; running so the trims were set to only flicker red sli All the settings on the remote were set to 12:00 o'clock except for the master that was at 1
    23 KB (3,709 words) - 18:12, 10 September 2022
  • T1 ToneMatch® Audio Engine / KickGate
    KickGate settings are available in the Comp/Gate menu on the {{T1}}. My gigs are divided between acoustic drums, electronic drums, and open mic settings. Things change almost every gig.
    4 KB (718 words) - 04:48, 26 March 2017
  • L1® Model II / FAQ
    ...stands. Longer B1 cables may be obtained from [https://www.bhtu.com/Local Settings/Application Data/Microsoft/Word/www.audiopile.net www.audiopile.net]. ...tion in other parts of the world, please visit [https://www.bhtu.com/Local Settings/Application Data/Microsoft/Word/www.bose.com/musicians www.Bose.com/musicia
    42 KB (6,832 words) - 05:25, 26 March 2017
  • Parametric EQ / Solving Problems
    ...low end thump from a percussive right hand technique use the Para EQ with settings like this. The default settings seem to work okay for me.
    6 KB (952 words) - 15:34, 8 June 2021
  • T1 ToneMatch® Audio Engine / Switching Between Instruments
    ...wasn't picking up my signal well. Well, I'd been playing with my 12-string settings a while back and that Channel Edit button was still pushed, even though I'd ...input to two Channels. The reason for doing this is to have two different settings - one for each instrument.
    2 KB (421 words) - 04:21, 26 March 2017
  • 2007 Fall Rocky Mountain Conference
    ...settings. If you don't want to travel with it but would like to have your settings you can email Tom a saved scene & it can be loaded at the conference if the
    23 KB (3,572 words) - 14:20, 19 March 2008
  • ToneMatch®
    Then, they stored the settings inside the T1, ready to be recalled at the touch of a button by any musicia ...ing with a growing number of manufacturers to develop these studio-quality settings for their microphones and instruments.
    5 KB (837 words) - 12:43, 22 May 2017
  • ToneMatch Mixer / zEQ
    [[Image:T1zEQ.png|right|T1 zEQ settings for vocal microphone]] __NOEDITSECTION__ ...the best fit for each instrument. <br><br> The T1 supports individual zEQ settings for each preset. Although most acoustic guitar presets use the same zEQ, ev
    7 KB (1,211 words) - 15:42, 9 December 2019
  • T1® / Downloads / Factory Settings
    ...c/f/8221072574/m/4981061874?r=4981061874#4981061874 T1™ Original Factory settings]</ref> [[Category:Factory Settings]]
    2 KB (371 words) - 16:47, 11 January 2020
  • T1 ToneMatch® Audio Engine Tips
    ...c/f/7521050644/m/8191015394?r=6721041005#6721041005 T1® Lid protects trim settings ] - StuartD ...s Housekeeping]] - [[User:jivauk|jivauk]] using Excel to record your Scene settings
    3 KB (425 words) - 04:11, 26 March 2017
  • Stage Layouts / ST Duo
    ...ezo) Preset: Acoustic Guitar / Flat zEQ. See [[Larrivee & Morgan ToneMatch Settings]] for details. ...use Preset: Acoustic Guitar / Flat zEQ. See [[Larrivee & Morgan ToneMatch Settings]] for details.
    3 KB (516 words) - 23:20, 4 June 2021
  • Connections / DJ VJ Computer to Model I
    Use the same settings for both L1®s Use the same settings for both L1®s
    4 KB (634 words) - 16:38, 27 May 2011
  • Zoom H4 and T1® Usage
    ...Engine manual for information regarding the “TAP” button options. Tap settings can be: pre-fader, post-EQ and effects, or post-fader. ...be aware you can change the "recording" mix by utilizing the AUX OUT level settings in the T1. You can have between 0% and 100% of a channel going to your Zoo
    10 KB (1,768 words) - 14:28, 11 March 2019
  • Denon x500
    The only mixer Eq settings I do use are for the mic. I usually cut the bass down to about nine o'clock ...he next dot past twelve which should be about two o'clock (I only use this settings for "larger" shows).
    3 KB (702 words) - 11:32, 22 March 2010
  • Electric Guitar
    ...Low, Mid, High are optimized for Electric Guitar. I usually leave the zEQ settings flat and do the tone shaping in the guitar processor.
    5 KB (762 words) - 12:12, 1 November 2019
  • Bose Engineer Ken Jacob Helps Artists Communicate with Audiences
    ....&nbsp;Can you talk about some of the perimeters that shift based on those settings? Are the presets primarily directed to the performer, the audience, or both ...nt resulted in any improvement. You said “Thanks!” and he stored those settings in a preset for you. That’s exactly what we do for various microphones an
    12 KB (2,083 words) - 19:34, 25 April 2012
  • GK 250 ML
    or 16 ohm (switchable) settings. Footswitch for channel switching With eq settings set, a great Mesa Boogie tone is achieved.</font></p>
    3 KB (476 words) - 19:52, 26 December 2014
  • ToneMatch® Mixer to S1 Pro System
    {{S1 Pro Mixer Settings}} ...see [[T4S/T8S_ToneMatch%C2%AE_Mixer#Aux_Outputs|T4S/T8S Aux Outputs]] for settings on the ToneMatch mixer.
    740 bytes (132 words) - 22:24, 16 November 2019
  • S1 Pro System Line Out
    <!-- {{:S1 Pro Daisy Chain Settings}} --> <details><summary>S1 Pro Daisy Chain Settings</summary></html>
    1 KB (168 words) - 22:09, 3 April 2021
  • T4S/T8S Reverb Settings for Vocals
    ...ngs are a great starting point for your vocal microphones. Then adjust the settings by ear to suit your personal preferences.
    568 bytes (76 words) - 10:43, 26 September 2018
  • S1 Pro With Mac Mini
    ...aired, turn on <em>Bluetooth</em>. This is typically found in the device's settings menu under "<em>Bluetooth</em>"</p> <p>In the device's <em>Bluetooth</em> settings, select the option to add or search for available devices</p>
    2 KB (385 words) - 22:20, 16 November 2019
  • Jazz Guitar
    ...://www.bosepro.community/g/portable/topic/jazz-guitar-settings Jazz Guitar Settings] in the Bose Portable PA Community. [[Category:Settings]]
    3 KB (441 words) - 22:18, 16 November 2019
  • T4S ToneMatch Mixer Monitor Outputs
    # [[{{PAGENAME}}#Aux Output|Use the channel AUX settings to set up a monitor mix]] Use the [[T4S Pan Aux|channel Aux settings]] to set up a monitor mix. <br>[[File:T4S Monitor Outputs Aux Out.png|400px
    2 KB (421 words) - 15:59, 24 December 2023
  • T4S/T8S Factory Settings
    {{T4S/T8S Factory Settings}} [[Category:Factory Settings]]
    63 bytes (10 words) - 16:49, 11 January 2020
  • Kemper Up/Down Buttons
    ...page in System Settings, reached via “Button Assignment” on the Remote Settings page.
    499 bytes (78 words) - 00:25, 16 October 2020
  • L1 Pro and SimpleSync
    # Tap the gear icon ⚙ at the top right (Product Settings) #* Tap the gear icon ⚙(Settings)
    2 KB (356 words) - 23:13, 29 March 2021
  • Bose L1 Pro8 Compared to L1 Pro16
    Store/recall system settings via Bose L1 Mix App Store/recall system settings via Bose L1 Mix App
    12 KB (941 words) - 15:01, 12 June 2021
  • Bose L1 Pro16 Compared to L1 Pro32
    Store/recall system settings via Bose L1 Mix App Store/recall system settings via Bose L1 Mix App
    13 KB (1,143 words) - 16:24, 23 September 2023
  • Main Page
    * [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
    10 KB (1,448 words) - 12:01, 30 March 2021
  • The Bose L1® Wiki Project
    * [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
    3 KB (563 words) - 11:17, 29 March 2017
  • L1® Unofficial Performers' Guide
    ...bunch of MIDI modules, use channels 1 and 2 for personal-preference preset settings, like your vocal microphone and, say, an acoustic guitar with a pickup. The
    12 KB (2,071 words) - 02:57, 26 March 2017
  • PS1 Powerstand Bass
    ...main corrections are at very low levels, and in most practical live music settings, the effect is pretty minor.
    5 KB (806 words) - 11:47, 15 March 2008
  • Steve's Tips and Tricks
    ...t a piece of tape (or several) on your remote and mark where you like your settings (much like people do with stomp boxes) so that if they get turned by accide
    3 KB (623 words) - 00:30, 23 December 2008
  • Feedback / Microphone
    ...ge. This is normal operation. If you want to run the trim control at lower settings we recommend using a preamp or simple stomp box level booster.
    16 KB (2,433 words) - 20:03, 1 July 2023
  • Crossover
    ...main corrections are at very low levels, and in most practical live music settings, the effect is pretty minor.
    7 KB (1,241 words) - 00:41, 28 June 2018
  • Presets - Finding What Works
    ...u find a couple of presets you like, start working with your gear and tone settings on the Remote.
    5 KB (858 words) - 11:55, 13 April 2011
  • Korg T1
    ...st need to put your keyboard back like you found it and reload you factory settings.
    6 KB (1,011 words) - 03:07, 13 August 2011
  • R1 Remote Recommended
    ...onnected and the user then disconnects the {{R1}}, it will retain the last settings of the {{R1}} before you disconnected it. This is helpful in the case where
    2 KB (289 words) - 18:08, 29 December 2007
  • Hearing the Same Thing
    ...entre of the room to help find the optimum setting for the volume and tone settings. Don't be surprised if the volume is lower than you expect. If the volume i
    4 KB (665 words) - 14:02, 3 December 2006

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Special:Search"