Difference between revisions of "T1 ToneMatch® Audio Engine Firmware Updates"
m (® replaces ™ and templates for links to updater) |
|||
Line 19: | Line 19: | ||
Recommended for: All T1™ Owners | Recommended for: All T1™ Owners | ||
− | Announcement: [http://bose.infopop.cc/eve/forums/a/tpc/f/8221072574/m/5791097384 New | + | Announcement: [http://bose.infopop.cc/eve/forums/a/tpc/f/8221072574/m/5791097384 New T1® and L1® Firmware] |
=== Fixes === | === Fixes === |
Revision as of 11:47, 25 February 2008
Firmware Prerequisites
|
Warning
After you update the T1 ToneMatch Audio Engine or L1 Model II firmware, if you see a window on the PC that says the update was not successful, you should:
- turn the L1 and T1 off
- wait three seconds
- then turn the L1 and T1 back on
Do this before trying the update again!
This allows the L1 and T1s to re-establish a good copy of the software.
Source: If your firmware update is not successful - Caution
Version 1.3
Download T1™ Firmware v 1.3
Date: 2007/08/10
Recommended for: All T1™ Owners
Announcement: New T1® and L1® Firmware
Fixes
Lost Audio / Blue Screen
Fixes a bug where some power outages could cause the T1 to hang. This is related to the problems reported on the message board where some users have experienced a loss of audio sometimes accompanied by a blank blue LCD screen.[1]
Scene Names
Fixes a bug related to scene naming where scene names over 17 characters would display incorrectly.
Enhancements
Parametric EQ
We've also made a small enhancement to the Parametric EQ by including the note name which relates to the current frequency.
Related
It is highly recommended that you also download and apply L1™ Model II Power Stand Firmware Updates Version 1.1
Prior Versions
- Version 1.0 - Original as released from manufacturing (no download)
- Version 1.1 - Internal release (no download)
- Version 1.2 - Internal Release (no download)
- ↑ Message Board reports of T1™ failures