Difference between revisions of "L1® Classic"
m (Presets) |
m (from a single Power Stand. See: Classic Extended Bass Package) |
||
Line 15: | Line 15: | ||
*** Amp 2 Out | *** Amp 2 Out | ||
*** Amp 3 Out (used for {{B1}}s) | *** Amp 3 Out (used for {{B1}}s) | ||
− | ** Features above support accessing the three amplifiers separately. One application is to drive up to six {{B1}}s from a single | + | ** Features above support accessing the three amplifiers separately. One application is to drive up to six {{B1}}s from a single Power Stand. See: [[Classic Extended Bass Package]] |
* Units that were shipped with the Version 2 [[Presets/Model I and Classic|Presets]] have a blue ring around the Amp 3 output (for {{B1}}s). | * Units that were shipped with the Version 2 [[Presets/Model I and Classic|Presets]] have a blue ring around the Amp 3 output (for {{B1}}s). | ||
Revision as of 13:12, 11 October 2007
This is the name now used to describe the L1 in the Bose® Personalized Amplification System™ family of products.
Introduced in 2003, this remained in production until 2007 when the L1 Model I was introduced. Visually and audibly, almost identical, the main differences were:
- See PS1 Powerstand Connections for a detailed view of the following
- On the right side of the input/output panel, there are inputs for
- All Amps In
- Amp 1 In
- Amp 2 In
- Amp 3 In
- There are outputs
- Amp 1 Out
- Amp 2 Out
- Amp 3 Out (used for B1 Bass Modules)
- Features above support accessing the three amplifiers separately. One application is to drive up to six B1 Bass Modules from a single Power Stand. See: Classic Extended Bass Package
- On the right side of the input/output panel, there are inputs for
- Units that were shipped with the Version 2 Presets have a blue ring around the Amp 3 output (for B1 Bass Modules).
- Identified by orange labels and L1™ logo
- Simpler output panel (dropped Amp 1 out, Amp 2 out)
- RoHS compliant.
Contents
Different Models
How to Tell the Difference Between L1 Models
This is how to tell which L1® unit you have.
2020 - Present | L1 Pro8, L1 Pro16, L1 Pro32 | |||
2020 - Present | Sub module for L1 Pro32 | |||
2018 - Present | 4 channel ToneMatch Mixer (stereo) | |||
2018 - Present | 8 channel ToneMatch Mixer (stereo) | |||
2018 - Present | Extremely Portable PA Battery powered | |||
2015 - Present | Flexible Array Loudspeaker and Subwoofer | |||
2003 - 2007 | ![]() | Rounded front. The Output Panel has Amp1 Out, Amp2 Out, Amp3 Out | ||
2007 - 2012 | ![]() | Rounded front. The Output Panel has no outputs for Amp1, Amp2, Amp3. The Output Panel and L1 Cylindrical Radiator® loudspeaker sections have orange L1® markers. |
||
2012 - 2020 | ![]() | Extending legs, one Cylindrical Radiator® (Top Array), Bottom Extension | ||
2007 - 2020 | ![]() | Extending legs, two Cylindrical Radiator®s, Bass Line Out, | ||
2003 - 2020 | ![]() | Up to two per Power Stand (above). More if using the PackLite® power amplifier model A1. 2 x 5.25" drivers, 26.6 lb | ||
2012 - 2020 | ![]() | Up to one per Power Stand (above). More if using the PackLite® power amplifier model A1. 2 x 10" drivers 45 lb. 3 position switch. | ||
2005 - 2020 | Allows bass expansion for L1 Classic L1 Model I L1 Model II (not L1 Compact not L1 Model 1S) | |||
2007 - 2018 | ![]() | T1 ToneMatch Audio Engine | ||
2009 - 2021 | ![]() | Integrated Power Stand and Bass Unit, two Extensions |
Compatibility with Other Members of the L1® Family of Products
Cylindrical Radiator®s
Cylindrical Radiator®s are not interchangeable across models
Specifically (and without exception)
- The Cylindrical Radiator speaker sections of the L1 Classic, the L1 Model I and L1 Model 1S and the L1 Model II are not compatible with each other.
- The Cylindrical Radiator speaker sections of the L1 Classic can only be used with the Classic PS1 power stand (no orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model I (orange markings on the back of both sections) can only be used with the Model I PS1 power stand (orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model II can only be used with the L1 Model II power stand.
- The Cylindrical Radiator speaker sections of the L1 Model 1S can only be used with the L1 Model 1S power stand.
T1 ToneMatch® Audio Engine, T4S/T8S ToneMatch® Mixers
- The ToneMatch mixers can be used with the
PackLite® power amplifier Model A1
- The PackLite® power amplifier model A1 can be used with
B1 Bass Module
- The B1 Bass Module can be used with the
B2 Bass Module
- The B2 Bass Module can be used with the
- L1 Classic Normal Mode only
- L1 Model I Normal Mode only
- L1 Model 1S all modes
- L1 Model II all modes but L1® Model II Power Stand Firmware version 1.4 or later required