Difference between revisions of "L1® Model II"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Interactive view link removed - only applicable to Model I)
m (L1™ Model II moved to L1® Model II: ® replaces ™)
(No difference)

Revision as of 01:39, 11 February 2008

L1 Model II This information is applicable to the L1®  Model II

L1™ Model II with 2 B1s

Introduced March 29, 2007

Firmware Updates

L1™ Model II disassembled


How to Tell the Difference Between Bose Portable PA Models

This is how to tell which L1®, S1 Pro, or F1 unit you have.

 
2023 - Present S1 Pro+ (optional wireless transmitters), Remote Control and ToneMatch Presets with Bose App
2020 - Present L1 Pro8, L1 Pro16, L1 Pro32, Remote Control and ToneMatch Presets with Bose App
2020 - Present Sub module for L1 Pro32
2018 - Present 4 channel ToneMatch Mixer (stereo)
2018 - Present 8 channel ToneMatch Mixer (stereo)
2015 - Present Flexible Array Loudspeaker and Subwoofer

2003 - 2007 Classic30.pngRounded front. The Output Panel has Amp1 Out, Amp2 Out, Amp3 Out
2003 - 2020 B1 Bass ModuleUp to two per Power Stand (above). More if using the PackLite® power amplifier model A1. 2 x 5.25" drivers, 26.6 lb
2005 - 2020  Allows bass expansion for L1 Classic L1 Model I L1 Model II (not L1 Compact not L1 Model 1S)
2007 - 2012 ModelI30.pngRounded front. The Output Panel has no outputs for Amp1, Amp2, Amp3.
The Output Panel and L1 Cylindrical Radiator® loudspeaker sections have orange L1® markers.
2007 - 2020 MII32.pngExtending legs, two Cylindrical Radiator®s, Bass Line Out,
2007 - 2018 T1® ToneMatch Audio EngineT1 ToneMatch Audio Engine
2009 - 2021 L1® CompactIntegrated Power Stand and Bass Unit, two Extensions
2012 - 2020 MII32.pngExtending legs, one Cylindrical Radiator® (Top Array), Bottom Extension
2012 - 2020 B2 Bass ModuleUp to one per Power Stand (above). More if using the PackLite® power amplifier model A1. 2 x 10" drivers 45 lb. Three position Bass Level switch.
2018 - 2023 Extremely Portable PA Battery powered



Compatibility with Other Members of the L1® Family of Products

Cylindrical Radiator®s

Cylindrical Radiator®
Cylindrical Radiator®s are not interchangeable across models

Specifically (and without exception)

T1 ToneMatch® Audio Engine, T4S/T8S ToneMatch® Mixers

PackLite® power amplifier Model A1

B1 Bass Module

B2 Bass Module

FAQs

NOTE: these will be moved to a new page when there are more of them.

Analog Input

The Analog input is a ¼ inch balanced input jack. There is a trim control.

Stereo Input to to Analog Input?

Q: Can I run a stereo signal with a ¼ inch Tip-Ring-Sleeve connection to the L1 Model II Analog Input?

A: This is not recommended, and may result in very little sound.

MikeZ-at-Bose [1]

A bit more clarification - if you plug a true stereo TRS into a model II analog input you'll actually get VERY little sound.
Since the analog input is balanced, it actually will subtract the Left from the Right (this is how balanced inputs have less noise...I could explain more if anyone is interested). For many recordings, this ends up being very little sound.
Just wanted to clarify - you cannot 'get through the gig' this way if you're a DJ or needing to run prerecorded music.

Analog Input for Second T1 ToneMatch Audio Engine

The L1 Model II will support two T1 ToneMatch Audio Engines. See T1 ToneMatch™ Audio Engine / Connections to Model II for details.

Start Up / Cycle Time

The model II takes a few seconds to fully boot up and then turn the audio on. Make sure you are waiting the right amount of time.

Secondly, if you do reset the system for some reason, be sure to wait a full two or three seconds between turning it off and turning it back on.

- MikeZ-at-Bose[2]

Fan Noise

Q: The fan in the Power Stand comes on when I strike a chord on my Guitar. Is this normal? A: Your unit is functioning properly - no problem.

The fan in the PS2 comes on when the input signal level goes over a certain limit, regardless of what the internal temperature of the unit is. That way, the unit never gets too hot to where a fan needs to be on constantly.

Whatever you do, please don't cover up the fan port.[3]

There is a Firmware Update that addresses the fan behaviour. See: L1™ Model II Power Stand Firmware Updates#Fan_Behavior

Height

The fully assembled height of the L1 Model II is 84 inches. (213.36 cm)

Clearance required to assemble is approximately 87.5 inches. (222.25 cm)

Input Panel

L1™ Model II Input Panel
  • Analog input, trim control and signal/clip LED
Line-level analog input accepts 1/4" TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems. Trim control lets you adjust the level of analog input signal. Signal/clip LED indicates status of analog input signal.
  • Bass module out
Delivers amplified bass output signal to one or two B1 bass modules. L1 system automatically adjusts equalization appropriately when bass modules are connected.
  • ToneMatch™ port
Digital audio and power connection for ToneMatch audio engine. Use with included ToneMatch cable.
  • Bass line out
Post-DSP bass signal output. Accepts 1/4" TRS phone cable. Use to connect PackLite® amplifier with up to two additional bass modules. Can also be used to connect powered subwoofer or additional amplification system.

No Speakers Attached

If you want to record using USB without using the L1 Cylindrical Radiator® loudspeaker or B1 Bass Module ...

You can certainly run the L1 with all, some, or none of the speakers connected. With no speakers connected it will happily serve as a big power supply for the T1. You are in no way risking damage to the unit by doing this.[4]

L1™ Model II Power Stand/Bass Line Out


Articulated Array®

L1™ Model II Articulated Array®

Identifying this Model

  • Retractable legs
Provide stability for streamlined L1 Model II power stand and loudspeaker. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport. Small footprint also frees up room on tight stages.
  • Light weight (23.7 lbs (10.7 kg)

Compatibility

Compatible with

Related Documents

L1™ Model II Documentation


Mechanical Specifications

L1 Model II

  • L1 Model II Cylindrical Radiator® loudspeaker top:
    • 43 1/2H x 3 1/2W x 4D (1.1 m x 9.0 cm x 10.5 cm)
    • 16.3 lbs (7.4 kg)
  • L1 Model II Cylindrical Radiator® loudspeaker bottom:
    • 43 1/2H x 3 1/2W x 4D (1.1 m x 9.0 cm x 10.5 cm)
    • 17.4 lbs (7.9 kg)
  • L1™ Model II power stand:
    • 5H x 10W x 27D (12.8 cm x 26.2 cm x 69.2 cm)
    • 23.7 lbs (10.7 kg)


B1 Bass module

    • 15H x 10 1/4W x 17 3/4D (38.0 cm x 26.0 cm x 45.0 cm)
    • 25.1 lbs (11.4 kg)

T1 ToneMatch™ audio engine

    • 2 2/3H x 6 1/2W x 8 1/4D (6.76 cm x 16.6 cm x 20.9 cm)
    • 2.1 lbs (1.0 kg)

Electrical

  • AC power rating:
    • 100-120V 50/60Hz 500W (USA/Canada)
    • Power stand inputs/outputs
  • ToneMatch port for T1 ToneMatch audio engine
    • 1/4" analog input
    • 1/4" bass line output
    • Neutrik NL4 bass module out


What's in the Box

  • L1 Model II Cylindrical Radiator® loudspeaker box ===
    • Loudspeaker top and bottom
    • Carrying bags
    • Power stand box
    • Power stand
    • Power cord
    • Protective plug
    • Carrying bag


L1 Model II This information is applicable to the L1®  Model II