T1 ToneMatch® Audio Engine Tips

This is a compilation of Tips for the T1 ToneMatch Audio Engine shared by T1® owners on the Bose^® Pro Portable PA Community.

• T1® Digital Delay to synchronize L1®s - ST

• T1® ParaEQ eliminates Wind Noise - Woody B (What to do in windy situations...?)

• T1® ParaEQ solves thumping from X Bridge (piezo pickup) - Strat Man (T1 and x bridge)

• T1® Noise Gate solves single coil buzz - jayare (eliminating single -coil buzzzzz)

• T1® use with non-Bose PA - open-road-matt (Value of Presets)

• T1® cases - open-road-matt (Protecting the T1™)

• T1® and Difficulty seeing buttons outdoors - many contributors

• T1® Noise Gate helps with Feedback - ~Musicman~ and Esparka - Feedback Problems

• T1® Lid protects trim settings - StuartD

• T1® with Passive Piezo Pickups - MBanshee

If you have instruments with passive pickups, and instruments with active pickups or preamps, try the passive pickups in T1™ Channels 1, 2, or 3. You can put the instruments with active pickups or preamps into Channels 4/5. Bouzouki with passive McIntyre Pickup to T1™ - MBanshee.

• T1® Bypass feature for A/B comparisons - Ken-at-Bose mini tutorial

• All cables strapped to the microphone stand - ST

• T1 ToneMatch™ Audio Engine / Switching Between Instruments - mbanshee

• T1® Microphone Bracket - thoughts, ideas, alternatives - Many contributors

• T1 ToneMatch® Audio Engine / In Ear Monitors - Drumr

The conversation continues in the Message Board

---