Search results
Create the page "Insert" on this wiki! See also the search results found.
- # Insert the CD #1 DSP Software Update 1.84 disc into the DVD player. Press the STOP # Insert the CD #2 Presets 2.0 Update disc into the DVD player. Press the STOP butto7 KB (1,127 words) - 15:32, 1 November 2016
- ...ng setup (such as putting a 1/4 intended for channel 4 into the channel 2 "Insert" socket, or plugging the B1 cable into Amp 2 output) - particularly during ...e door wouldn't close (the closed door comes really close to the channel 2 insert socket).2 KB (377 words) - 23:26, 15 August 2007
- Setup: Used the Insert connector on the PS1 to route through the main in/out in the Kosmos Pro. ...udio directly into the PS1s, channel 1, using 00 preset. Use the channel's INSERT connector to connect to the Kosmos' main I/O. Don't use the Kosmos' subwoof6 KB (957 words) - 18:38, 26 March 2017
- # Then I insert the ToneMatch cable into the T1®. It locks into place. #I insert all the other cables into the T1® before I put it on the bracket. I do it2 KB (397 words) - 05:11, 26 March 2017
- * 6mm (1/4"-20) threaded insert at the bottom for use with mounting hardware, ...Radiator® stand and the mic stand adapter (replaced by the common 1/4"-20 insert)3 KB (453 words) - 01:38, 17 May 2021
- An inline pad can be easily soldered, you'll need to insert 3 resistors into your mic cable. The values of these three resistors are de To build a -20dB attenuation pad insert the following three resistors into your XLR cable path.6 KB (1,027 words) - 16:07, 30 July 2024
- * Make sure the Speakon cables (blue) are really connected. Insert and turn clockwise. There should be an audible click. You should have to sl12 KB (2,071 words) - 02:57, 26 March 2017
- # Insert the L1™ Cylindrical Radiator sections9 KB (1,320 words) - 05:36, 25 November 2018
- ...gets “thumped” and a knob is hard to turn, you can pull it off and re-insert the knob. What’s happening is the bottom of the knob is rubbing on the co3 KB (623 words) - 00:30, 23 December 2008
- CH INSERT OUT (1 – 2) 150 Ω 10 kΩ Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Pho1 KB (216 words) - 03:22, 21 December 2008
- Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up1 KB (206 words) - 18:33, 23 June 2009
- Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up1 KB (207 words) - 18:34, 23 June 2009
- <big>''' TC-Helicon VoiceLive (Insert Method) '''</big>1 KB (191 words) - 19:12, 22 January 2007
- ...comments with four tilde symbols <nowiki>~~~~</nowiki> and the system will insert your name, date and time.6 KB (1,039 words) - 19:36, 22 December 2008
- ...a melody, not with a fully-produced, full-production music track that you insert your-lyric-here into. My children, some of them musicians but all of them27 KB (4,639 words) - 18:37, 26 March 2017
- # Insert Loop2 KB (295 words) - 16:43, 12 January 2012
- ...- If you want to use two effects channels with the DE-1 you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up1 KB (171 words) - 13:39, 26 December 2006
- <div style="color:red; weight:bold;">DO NOT Connect/Insert the Cylindrical Radiator Loudspeaker into the PS1 Powerstand</div>2 KB (262 words) - 00:12, 7 December 2008
- ...s that are specific to a channel (normally these would be connected to the insert loop of this channel). The "shared" effects typically come into the board t5 KB (923 words) - 20:02, 9 July 2018
- ...www.tc-helicon.com/VoiceLive TC Helicon Voicelive] ( for harmonies ) as an insert on the vocal channel. So, I used it to add compression to the vocal channel5 KB (851 words) - 11:19, 19 September 2008