Search results
Create the page "T4S/T8S" on this wiki! See also the search results found.
Page title matches
- ** T4S: Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve ** T8S: Two XLR analog outputs two analog 1/4" Tip-Ring-Sleeve3 KB (453 words) - 01:38, 17 May 2021
- {{T4S icon}}{{T8S icon}} {{T4S/T8S ToneMatch Mixer Owners Guide}}9 KB (1,484 words) - 23:55, 13 December 2023
- #REDIRECT [[T4S/T8S ToneMatch® Mixer]]39 bytes (7 words) - 10:21, 18 June 2019
- #REDIRECT [[T4S/T8S FAQ]]25 bytes (6 words) - 01:17, 8 February 2018
- {{T4S/T8S FAQ}} See the full article about the [[T4S/T8S ToneMatch® Mixer|T4S/T8S ToneMatch® Mixer]]142 bytes (30 words) - 01:25, 8 February 2018
- #REDIRECT [[T4S/T8S ToneMatch® Mixer Firmware Updates]] ...pe-B port on the rear panel of your mixer. <br>See Figure 1.<br>[[File:T4S T8S firmware update figure 1.jpg|640px]]<br>1 KB (261 words) - 17:15, 26 April 2018
- {{T4S/T8S Check your Firmware}}31 bytes (7 words) - 00:26, 4 March 2018
- == T4S/T8S Fast Track Firmware Update == == T4S/T8S Fast Track Firmware Update ==12 KB (1,725 words) - 19:23, 6 August 2023
- #REDIRECT [[T4S/T8S ToneMatch® Mixer Firmware Updates]]56 bytes (9 words) - 09:49, 28 March 2018
- ;Note: For best results, please make sure your firmware is up to date [[T4S T8S Firmware Update Instructions]] {{T4S/T8S Reverb Settings}}3 KB (555 words) - 14:17, 29 May 2019
- {{T4S/T8S Reverb Settings}}27 bytes (6 words) - 15:25, 25 May 2018
- {{T4S/T8S USB A}}17 bytes (6 words) - 15:58, 31 May 2018
- {{T4S/T8S Factory Reset}}25 bytes (6 words) - 10:11, 29 June 2018
- For more detailed information see: [[T4S/T8S ToneMatch® Mixer Reverb]] [[Category:T4S]]568 bytes (76 words) - 10:43, 26 September 2018
- {{ToneMatch Mixer}} using Aux Inputs (4/5 on {{T4S}} 9/10 on {{T8S}}) # Check the input levels <br>[[File:T4S Aux Input Signal Level Indicators.png|640px]]2 KB (374 words) - 17:38, 2 December 2018
- #REDIRECT [[T4S/T8S ToneMatch® Mixer]]39 bytes (7 words) - 05:34, 9 March 2019
- {{T4S/T8S Tuner}}17 bytes (5 words) - 10:36, 22 August 2019
- {{T4S/T8S Factory Settings}}63 bytes (10 words) - 16:49, 11 January 2020
- {{T4S/T8S Mono Output}} [[Category:T4S]]106 bytes (17 words) - 12:04, 6 November 2019
- ...ut of your acoustic guitar and the input of a mixer or PA system. With the T4S settings set to FLAT/Bypass follow the instructions in the LR Baggs owner's You have the option to connect the LR Baggs Session DI to the T4S using an XLR or 1/4 inch (6.3 mm) Tip-Sleeve cable.4 KB (656 words) - 15:13, 3 February 2020
- #REDIRECT [[LR Baggs Session DI to ToneMatch Mixer T1/T4S/T8S]]63 bytes (13 words) - 13:55, 3 February 2020
- [[Category:T4S]] [[Category:T8S]]297 bytes (31 words) - 02:09, 14 January 2021
- You can use the T4S/T8S headphone output (using a 1/4 inch (6.3 mm) Tip-Ring-Sleeve TO 1/8 inch (3. ...ereo sources like the headphone output of a computer, tablet, phone or T4S/T8S headphone jack output.613 bytes (99 words) - 00:00, 14 December 2023
- #REDIRECT [[T4S/T8S Headphone Output to S1 Pro as a Monitor]]61 bytes (13 words) - 00:00, 14 December 2023
- You can use the T4S/T8S headphone output (using a 1/4 inch (6.3 mm) Tip-Ring-Sleeve TO 1/8 inch (3. ...ereo sources like the headphone output of a computer, tablet, phone or T4S/T8S headphone jack output.674 bytes (110 words) - 15:54, 24 December 2023
Page text matches
- == T4S/T8S Fast Track Firmware Update == == T4S/T8S Fast Track Firmware Update ==12 KB (1,725 words) - 19:23, 6 August 2023
- {{T4S icon}}{{T8S icon}} {{T4S/T8S ToneMatch Mixer Owners Guide}}9 KB (1,484 words) - 23:55, 13 December 2023
- {{Model II icon}}{{T8S icon}}{{T1 icon}} This is an example of how you can connect a {{T1}} to a {{T8S}} to two {{Model II}} systems.2 KB (290 words) - 12:39, 10 October 2019
- {{Model II icon}}{{T8S icon}}{{T1 icon}} <div>This is an example of how you can connect a {{T1}} to a {{T8S}} to a single {{Model II}} systems. You can connect the {{T1}} to2 KB (333 words) - 11:04, 8 April 2019
- {{T4S icon}}{{S1 icon}} <div><h2>Connect a {{T4S}} to an {{S1}} as the only powered loudspeaker</h2>3 KB (510 words) - 17:52, 2 May 2022
- {{T4S icon}}{{L1 Pro icon}} This article applies to a T4S ToneMatch Mixer connecting to an L1 Pro (any model).2 KB (379 words) - 13:41, 7 August 2023
- {{L1 Pro icon}}{{Model II icon}} {{T8S icon}} {{T4S icon}} {{T1 icon}} {{Kemper icon}} * [[T4S/T8S_ToneMatch®_Mixer|T8S ToneMatch Mixer]] <!--(approx draw 10 watts) -->56 KB (6,401 words) - 10:35, 11 February 2024
- {{T8S icon}} ...ortable/topic/t8s-analog-vs-digital-connection-to-l1-model-1s-and-model-ii T8S Analog vs Digital Connection to L1® Model 1S and L1® Model II discussion]3 KB (541 words) - 11:02, 28 February 2018
- {{T8S icon}}{{Model II icon}} Connect a {{T8S}} to a single {{Model II}} or {{Model 1S}}2 KB (331 words) - 11:03, 9 May 2022
- <td valign="top">Use the T8S Aux Output to send a monitor mix to the {{S1}} <p>Here's a quick overview of how you can connect a T8S to an S1 Pro</p>2 KB (427 words) - 01:52, 13 August 2021
- {{T4S icon}}{{Model II icon}} {{L1 Pro icon}} ;How do I set up a powered monitor with my {{T4S}} and an L1 with at ToneMatch Port? ({{Model II}} or {{Model 1S}} or {{L1 P2 KB (421 words) - 15:59, 24 December 2023
- <td valign="top">Use the T8S Main Output(s) to the {{S1}} <p>Here's a quick overview of how you can connect a T8S to an S1 Pro (mono) or two S1 Pro (stereo)</p>3 KB (517 words) - 17:00, 4 January 2024
- {{T8S icon}}{{Model 1S icon}} Connect a {{T8S}} to a single {{Model 1S}}2 KB (310 words) - 10:42, 3 October 2019
- ** T4S: Two digital ToneMatch outputs and parallel analog 1/4" Tip-Ring-Sleeve ** T8S: Two XLR analog outputs two analog 1/4" Tip-Ring-Sleeve3 KB (453 words) - 01:38, 17 May 2021
- {{T1 icon}}{{T4S icon}}{{T8S icon}} Note: Scenes created with a {{T1}} are not compatible with {{T4S}}/{{T8S}}. Although functionally similar there are too many differences (e.g., Reve1 KB (222 words) - 16:11, 18 April 2023
- === {{T4S}}/{{T8S}} === ;Question: Can I use a {{T4S}}/{{T8S}} to provide phantom power to a microphone?3 KB (474 words) - 13:59, 23 April 2019
- Connect a {{T8S}} to two {{Model II}}s or two {{Model 1S}} or one of each. * Connect the ToneMatch Power Supply to the {{T8S}} for power.1 KB (231 words) - 12:31, 10 April 2019
- ...ut of your acoustic guitar and the input of a mixer or PA system. With the T4S settings set to FLAT/Bypass follow the instructions in the LR Baggs owner's You have the option to connect the LR Baggs Session DI to the T4S using an XLR or 1/4 inch (6.3 mm) Tip-Sleeve cable.4 KB (656 words) - 15:13, 3 February 2020
- === ToneMatch Updater Software for {{T1 nl}} and T4S/T8S === ...date the firmware for your T4S or T8S please follow this link ⇒ [[T4S T8S Firmware Update Instructions]]</big>4 KB (647 words) - 22:00, 10 February 2020
- {{T1 icon}}{{T4S icon}}{{T8S icon}} # (T4S/T8S) Leave Ramp/Speed at '''50%''' (T4S/T8S)4 KB (659 words) - 11:47, 29 July 2023
- #REDIRECT [[T4S/T8S ToneMatch® Mixer Firmware Updates]] ...pe-B port on the rear panel of your mixer. <br>See Figure 1.<br>[[File:T4S T8S firmware update figure 1.jpg|640px]]<br>1 KB (261 words) - 17:15, 26 April 2018
- ;Note: For best results, please make sure your firmware is up to date [[T4S T8S Firmware Update Instructions]] {{T4S/T8S Reverb Settings}}3 KB (555 words) - 14:17, 29 May 2019
- ==== {{T4S}}/{{T8S}} ==== The {{ToneMatch Mixer}} trim controls for Channels 1-4 (1-8 for the {{T8S}}) provide a significant gain increase when you reach the upper limit. This16 KB (2,433 words) - 20:03, 1 July 2023
- {{Compact icon}} {{T8S icon}} Here's a quick overview of how you can connect a {{T8S}} to an {{Compact}}2 KB (321 words) - 14:13, 9 November 2019
- {{T1 icon}}{{T4S icon}}{{T8S icon}} ...t to lose any saved Scenes you can load the Factory Settings Scene (T1/T4S/T8S).795 bytes (135 words) - 16:47, 11 January 2020
- ...in Staging|T1 Gain Staging]], [[T4S/T8S_ToneMatch®_Mixer#Gain_Staging|T4S/T8S Gain Staging]] ...x_Inputs|T4S/T8S Aux Inputs]], [[T4S/T8S_ToneMatch®_Mixer#Aux_Outputs|T4S/T8S Aux Outputs]]2 KB (311 words) - 13:34, 21 January 2019
- == Connect the T8S to {{Model II}} == [[File:T8S to F1 Model 812 TRS x 2.jpg|600px]]1 KB (198 words) - 21:40, 22 November 2020
- Can I connect the Master Outputs from my {{T4S}} or {{T8S}} to RCA phono inputs on a mixer? [[File:T4S Main Outputs.jpg|600px]]920 bytes (153 words) - 10:49, 6 September 2018
- ...ToneMatch Power Supply to power the ToneMatch mixer unless you are using a T4S also connected to an L1 Model II or or L1 Model 1S. ...onitor with a T4S/T8S, see [[T4S/T8S_ToneMatch%C2%AE_Mixer#Aux_Outputs|T4S/T8S Aux Outputs]] for settings on the ToneMatch mixer.740 bytes (132 words) - 22:24, 16 November 2019
- {{T4S icon}}{{T8S icon}}{{T1 icon}} ...l-world examples. <br>This article applies to all ToneMatch mixers (T1/T4S/T8S).6 KB (952 words) - 15:34, 8 June 2021
- {{T4S icon}}{{T8S icon}}{{T1 icon}} ...ToneMatch Mixer. <br>This article applies to all ToneMatch mixers (T1/T4S/T8S).3 KB (421 words) - 15:49, 8 June 2021
- {{T4S icon}}{{T8S icon}}{{T1 icon}} <br>This article applies to all ToneMatch mixers (T1/T4S/T8S).6 KB (930 words) - 15:42, 8 June 2021
- {{T4S/T8S FAQ}} See the full article about the [[T4S/T8S ToneMatch® Mixer|T4S/T8S ToneMatch® Mixer]]142 bytes (30 words) - 01:25, 8 February 2018
- # Select Reverb Type with the T1 rotary selector. <br>On the T4S or T8S, select if you are applying the reverb type to the Main output or Aux outpu # (T4S/T8S only) Press the Balance button to select the Time Control <br>Rotating the3 KB (525 words) - 13:15, 8 April 2018
- ...T4S T8S Firmware Update Instructions]] ⇐ If you just got a new T4S or T8S follow this link.7 KB (1,043 words) - 01:40, 22 May 2021
- You can use the T4S/T8S headphone output (using a 1/4 inch (6.3 mm) Tip-Ring-Sleeve TO 1/8 inch (3. ...ereo sources like the headphone output of a computer, tablet, phone or T4S/T8S headphone jack output.613 bytes (99 words) - 00:00, 14 December 2023
- You can use the T4S/T8S headphone output (using a 1/4 inch (6.3 mm) Tip-Ring-Sleeve TO 1/8 inch (3. ...ereo sources like the headphone output of a computer, tablet, phone or T4S/T8S headphone jack output.674 bytes (110 words) - 15:54, 24 December 2023
- ...T8S Firmware Update Instructions]]<br> ⇑ If you just got a new T4S or T8S follow this link.7 KB (1,086 words) - 00:27, 18 February 2024
- ...of the gig I may use a one or two L1 Pro32 or L1 Pro16 or L1 Pro8 with a [[T4S/T8S_ToneMatch®_Mixer]] {{T4S icon}}{{T8S icon}}{{T1 icon}}24 KB (3,721 words) - 12:54, 8 August 2023
- {{ToneMatch Mixer}} using Aux Inputs (4/5 on {{T4S}} 9/10 on {{T8S}}) # Check the input levels <br>[[File:T4S Aux Input Signal Level Indicators.png|640px]]2 KB (374 words) - 17:38, 2 December 2018
- === T4S/T8S ToneMatch® Mixers === Bose Pro announced the T4S/T8S ToneMatch® Mixers, Jan 23, 2018.21 KB (2,953 words) - 18:18, 16 October 2022
- == Third Party Mixer to ToneMatch Mixer (T4S/T8S) ==5 KB (788 words) - 06:27, 2 December 2018
- === T4S/T8S ToneMatch Mixers ===4 KB (640 words) - 19:22, 20 February 2024
- This appears on all ToneMatch mixers ({{T1}}, {{T4S}}, {{T8S}}} All ToneMatch mixers ({{T1}}, {{T4S}}, {{T8S}}) running Factory Presets 1.0 or 1.1724 bytes (96 words) - 12:31, 24 August 2018
- ...}. You can use two of the main channels ({{T4S}} channels 1, 2, 3, 4 or {{T8S}} channels 1, 2, 3, 4, 5, 6, 7, 8. ...ls to optimize the signal output from the mixer to match the inputs of the T4S1 KB (205 words) - 06:33, 2 December 2018
- ...ems: The architecture of the T1 ToneMatch differs from that of the T4S and T8S ToneMatch mixers and is not compatible with the L1 Pro’s S/PDIF audio arc ...hich allows them to carry other data such as firmware updates. The T4S and T8S ToneMatch mixers use an updated version of ToneMatch protocol, which is com3 KB (441 words) - 20:35, 8 December 2021
- === With a ToneMatch Mixer (T1, T4S/T8S) ===2 KB (300 words) - 16:59, 18 April 2023
- === {{T4S}} Documentation === {{T4S/T8S ToneMatch Mixer Owners Guide}}1 KB (182 words) - 05:09, 18 February 2018
- ** {{T4S}} channels 1, 2, 3, 4 ** {{T8S}} channels 1, 2, 3, 4, 5, 6, 7, 88 KB (1,252 words) - 19:43, 10 March 2020
- {{T8S icon}}{{T4S icon}}{{T1 icon}} On the [[T8S]] use the meters. The average output level should be near 0dBU. If you hit3 KB (508 words) - 06:27, 22 December 2018