T4S ToneMatch Mixer Monitor Outputs

T4S

L1 Model II

How do I set up a powered monitor with my T4S ToneMatch mixer and L1 Model II or L1 Model 1S or L1 Pro The L1 Pro models share a common user interface and the L1 Mix app. This page has links to resources for all three models and the Bose products that integrate with them. L1 Pro Family Bose Pro announced the Bose L1 Pro line, October 26, 2020. L1 Mix App T4S/T8S ToneMatch® Mixers Documentation L1 Pro8 L1 Pro8 Owners Guide L1 Pro8 Quick Start Guide L1 Pro16 L1 Pro16 Owners Guide L1 Pro16 Quick Start Guide L1 Pro32 L1 Pro32 Owners Guide L1 Pro32 Quick Start Guide Sub1/Sub2 Sub1/Sub2 Owners Guide Sub1/Sub2 Quick Start Guide L1 Pro Technical Data Sheets L1 Pro8 Technical Data Sheet L1 Pro16 Technical Data Sheet L1 Pro32 Technical Data Sheet Sub1 Technical Data Sheet Sub2 Technical Data Sheet L1 Pro Self-Serve Support Bose Self-Serve Support L1 Pro8 Bose Self-Serve Support L1 Pro16 Bose Self-Serve Support L1 Pro32 L1 Pro Firmware L1 Pro Firmware Resources L1 Pro Application Guide Bose Portable PA Brochure L1 Pro Family Selection Guide (product comparison) Choosing the L1 Pro System That's Right for You (Youtube) / (Facebook livecast) Bose L1 Pro Overview Videos Bose L1 Pro Technical Training Videos L1 Pro and the Mobile DJ - video Bose Pro Portable PA Community L1 Pro Technical Certification Course (no charge, but you must register) Articles Should I get an L1 Pro8 or L1 Pro16? Should I get an L1 Pro16 or L1 Pro32? Do I Need to Upgrade from the L1 Compact to the L1 Pro8? Do I Need to Upgrade from the L1 Model II to the L1 Pro32? L1 Pro Do You Need All Three Which L1 Pro for Singer/Songwriter/Electric Guitarist T1 Compatibility With L1 Pro Systems L1 Pro and SimpleSync Connect L1 Pro to Bose Smart Speaker Group L1 Pro32 Separating the Sections of the Mid-High Array L1 Pro16 Wobble Comparing Specifications Comparing L1 Pro Models Bose L1 Pro8 Compared to L1 Pro16 Bose L1 Pro16 Compared to L1 Pro32 Comparing L1 Pro Power Stands to Subs Sub Comparison Legacy to L1 Pro Models Bose L1 Compact Compared to L1 Pro8 Bose L1 Model 1S Compared to L1 Pro16 Bose L1 Model II Compared to L1 Pro32 Throw Over Distance Quick Tips L1 Pro Line Out The XLR Line Output from any L1 Pro contains the sound from all inputs (1, 2, 3, Bluetooth, and ToneMatch Port). That includes ToneMatch Presets Tone Controls Reverb The signal from a ToneMatch mixer connected to the ToneMatch port including ToneMatch Presets, zEQ, Reverb, Effects. The sound is NOT affected by the L1 Pro System EQ setting. L1 Pro Daisy Chain Want to connect one or more L1 Pro systems together? See L1 Pro Daisy Chain L1 Pro System EQ The System EQ feature on the L1 Pro systems applies an EQ preset to the master output. This is similar to a graphic equalizer on traditional analogue mixers, but it uses four presets instead for quick access. read more — L1 Pro System EQ L1 Pro32 Half Stack Can I operate the L1 Pro32 with only the lower section of the line array? Sometimes there is not sufficient height to use the full array Yes The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32 Source: Page 7 of the L1 Pro32 Owners Guide For best results, ensure array is at ear level for listeners Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance. It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate. Craig Small - Bose Half Stack Not Recommended for Small Gigs Running only the lower section of the Line Array is a workaround when there isn't enough ceiling clearance to use both sections. For small gigs, turn down the volume on the L1 Pro32, don't run without the top section of the array because You'll need to elevate the system so the array is at ear level for the audience. Otherwise, the sound will be muffled You will reduce your projection over distance. The sound will drop off more over distance. You may need to turn up the volume louder than if you were using the full array. As a result, you increase the likelihood of feedback. FAQ Q What are the mid-high array and lower mid-high array made from? Metal mesh front and is rear metal or plastic? A Arrays on all units feature an extruded aluminum sleeve. Perforated grille on the front, solid on the back. Source: Craig Small Sub1/Sub2 Sub1 Sub2 Sub1/Sub2‎‎ Sub Comparison S1 Pro with Sub1 or Sub2 Bose Music App / L1 Mix App March 2023 - The L1 Mix App is replaced by the Bose Music App Note: If you currently use the L1 Mix App, you may see a message that says to switch to the Bose Mix App. If you're not ready to do that (e.g., you're at a gig), tap the X to dismiss the message so you can continue with the L1 Mix App. L1 Mix App is Moving to Bose Music Firmware version 3.0.0 is required to use the new app. For more details about the firmware update see: L1 Pro Firmware Introduction to the Bose Music App It's L1 Pro control in your pocket. With the Bose Music app, you can access intuitive, wireless control of your Bose L1 Pro portable PA system. Tip Run your finger up and down over the dials (as though they were sliders). Don't try to follow the curve. ToneMatch Mixers T4S T8S Engineered with a powerful DSP engine and intuitive user control, the T4S/T8S ToneMatch mixers offer studio-quality EQ, dynamics and effects. Sound great with integrated BoseToneMatch processing and zEQ, especially when connected to a Bose L1 or F1 system for full end-to-end tonal control. read more — T4S/T8S ToneMatch® Mixers Other Bose Portable PA Products L1 Legacy F1 S1 Pro ? Note In the illustrations below, you can connect an L1 Pro The L1 Pro models share a common user interface and the L1 Mix app. This page has links to resources for all three models and the Bose products that integrate with them. L1 Pro Family Bose Pro announced the Bose L1 Pro line, October 26, 2020. L1 Mix App T4S/T8S ToneMatch® Mixers Documentation L1 Pro8 L1 Pro8 Owners Guide L1 Pro8 Quick Start Guide L1 Pro16 L1 Pro16 Owners Guide L1 Pro16 Quick Start Guide L1 Pro32 L1 Pro32 Owners Guide L1 Pro32 Quick Start Guide Sub1/Sub2 Sub1/Sub2 Owners Guide Sub1/Sub2 Quick Start Guide L1 Pro Technical Data Sheets L1 Pro8 Technical Data Sheet L1 Pro16 Technical Data Sheet L1 Pro32 Technical Data Sheet Sub1 Technical Data Sheet Sub2 Technical Data Sheet L1 Pro Self-Serve Support Bose Self-Serve Support L1 Pro8 Bose Self-Serve Support L1 Pro16 Bose Self-Serve Support L1 Pro32 L1 Pro Firmware L1 Pro Firmware Resources L1 Pro Application Guide Bose Portable PA Brochure L1 Pro Family Selection Guide (product comparison) Choosing the L1 Pro System That's Right for You (Youtube) / (Facebook livecast) Bose L1 Pro Overview Videos Bose L1 Pro Technical Training Videos L1 Pro and the Mobile DJ - video Bose Pro Portable PA Community L1 Pro Technical Certification Course (no charge, but you must register) Articles Should I get an L1 Pro8 or L1 Pro16? Should I get an L1 Pro16 or L1 Pro32? Do I Need to Upgrade from the L1 Compact to the L1 Pro8? Do I Need to Upgrade from the L1 Model II to the L1 Pro32? L1 Pro Do You Need All Three Which L1 Pro for Singer/Songwriter/Electric Guitarist T1 Compatibility With L1 Pro Systems L1 Pro and SimpleSync Connect L1 Pro to Bose Smart Speaker Group L1 Pro32 Separating the Sections of the Mid-High Array L1 Pro16 Wobble Comparing Specifications Comparing L1 Pro Models Bose L1 Pro8 Compared to L1 Pro16 Bose L1 Pro16 Compared to L1 Pro32 Comparing L1 Pro Power Stands to Subs Sub Comparison Legacy to L1 Pro Models Bose L1 Compact Compared to L1 Pro8 Bose L1 Model 1S Compared to L1 Pro16 Bose L1 Model II Compared to L1 Pro32 Throw Over Distance Quick Tips L1 Pro Line Out The XLR Line Output from any L1 Pro contains the sound from all inputs (1, 2, 3, Bluetooth, and ToneMatch Port). That includes ToneMatch Presets Tone Controls Reverb The signal from a ToneMatch mixer connected to the ToneMatch port including ToneMatch Presets, zEQ, Reverb, Effects. The sound is NOT affected by the L1 Pro System EQ setting. L1 Pro Daisy Chain Want to connect one or more L1 Pro systems together? See L1 Pro Daisy Chain L1 Pro System EQ The System EQ feature on the L1 Pro systems applies an EQ preset to the master output. This is similar to a graphic equalizer on traditional analogue mixers, but it uses four presets instead for quick access. read more — L1 Pro System EQ L1 Pro32 Half Stack Can I operate the L1 Pro32 with only the lower section of the line array? Sometimes there is not sufficient height to use the full array Yes The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32 Source: Page 7 of the L1 Pro32 Owners Guide For best results, ensure array is at ear level for listeners Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance. It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate. Craig Small - Bose Half Stack Not Recommended for Small Gigs Running only the lower section of the Line Array is a workaround when there isn't enough ceiling clearance to use both sections. For small gigs, turn down the volume on the L1 Pro32, don't run without the top section of the array because You'll need to elevate the system so the array is at ear level for the audience. Otherwise, the sound will be muffled You will reduce your projection over distance. The sound will drop off more over distance. You may need to turn up the volume louder than if you were using the full array. As a result, you increase the likelihood of feedback. FAQ Q What are the mid-high array and lower mid-high array made from? Metal mesh front and is rear metal or plastic? A Arrays on all units feature an extruded aluminum sleeve. Perforated grille on the front, solid on the back. Source: Craig Small Sub1/Sub2 Sub1 Sub2 Sub1/Sub2‎‎ Sub Comparison S1 Pro with Sub1 or Sub2 Bose Music App / L1 Mix App March 2023 - The L1 Mix App is replaced by the Bose Music App Note: If you currently use the L1 Mix App, you may see a message that says to switch to the Bose Mix App. If you're not ready to do that (e.g., you're at a gig), tap the X to dismiss the message so you can continue with the L1 Mix App. L1 Mix App is Moving to Bose Music Firmware version 3.0.0 is required to use the new app. For more details about the firmware update see: L1 Pro Firmware Introduction to the Bose Music App It's L1 Pro control in your pocket. With the Bose Music app, you can access intuitive, wireless control of your Bose L1 Pro portable PA system. Tip Run your finger up and down over the dials (as though they were sliders). Don't try to follow the curve. ToneMatch Mixers T4S T8S Engineered with a powerful DSP engine and intuitive user control, the T4S/T8S ToneMatch mixers offer studio-quality EQ, dynamics and effects. Sound great with integrated BoseToneMatch processing and zEQ, especially when connected to a Bose L1 or F1 system for full end-to-end tonal control. read more — T4S/T8S ToneMatch® Mixers Other Bose Portable PA Products L1 Legacy F1 S1 Pro in the same way as a L1 Model II or L1 Model 1S You have several options for creating a monitor mix. The same sound as you are sending to the L1 system Use the channel PAN controls to set up a monitor mix Use the channel AUX settings to set up a monitor mix

Main Right Output

This gives you the same sound as you are sending to the L1 system

If you have connected the L1 to ToneMatch Port
connect your monitor to the Main Right Output

Main Left Output

Use the channel pan controls to set up a monitor mix.

• Panned center will give you the same sound as you are sending to the L1
• Panned Hard Left will give you all of the sound in the monitor mix and not the L1
• Panned Slightly Left will give more of the sound in the monitor mix and than the L1

Aux Outputs

Use the channel Aux settings to set up a monitor mix.

T4S/T8S

This is an overview of using the Aux Outputs on the T4S and T8S ToneMatch® mixers. You can use the Aux outputs for monitors, remote speakers, or recording.

The steps are the same for the T4S and T8S.

Notes about the PAN/AUX display

The default view for PAN/AUX on the rotary selector is PAN. As a result:

• When you turn the rotary selector away from PAN/AUX, when you turn back, the display will show PAN. But the Aux settings haven't changed.
• When you change channels with the CH Edit buttons, the display will show PAN. But the Aux settings haven't changed.
• For both cases above, to return to the AUX display, press the MENU button (left most button under the display) and rotate to AUX. Your previous settings for PAN are preserved.

Setting up monitors example

Connect your monitors to the T4S Aux Outputs. On the T4S you have two Aux Outputs. You can direct any channel to one of the Aux Outputs to create a monitor mix. As you assign a channel to an Aux Output, you can set the level and make the Aux send from the channel:

Dry : After Preamp

The only control that has an effect on the signal is the channel trim.

Pre : With EQ and FX

All settings for Preset, zEQ, ParaEQ, effects are sent through to the Aux output. The volume is controlled by the Level setting in this menu. Volume is not affected by the channel volume control. Reverb available for Aux 1 output only.

Post : After Fader

The volume is controlled by the channel volume control.

Select a Channel you want to direct to one of the Aux outputs. Note: You can send up more than one Channel to each Aux output

In the image below the Channel 1 CH Edit button is selected.

Turn the Rotary Selector to PAN/AUX

Turn the leftmost button under the display Menu to see your options. You can choose Pan, Aux Input, or one of the Aux Outputs

This is how it looks on the T8S when you turn the menu far enough to see all four Aux Outputs. On the T4S there are two Aux Outputs.

In this picture we have chosen to direct Channel 1 to Aux 1. The level is 50% and the Tap is set to Pre

In this picture, Aux 1 is selected and you can choose if you want the Tap point to be Dry, Pre, or Post

Example - Create a Monitor Mix using Aux1

How do I send the performance mix to the Master Outputs and a different mix (different levels) to a monitor (Aux1).

In this example, we will send:

• Channel 1 (Microphone) to Aux 1
• Channel 2 (Guitar) to Aux 1
• Initially the mix will be the same for Aux1 as to the Master Output (ToneMatch port or Master Output(s)
• Then we will change the relative levels of the Channel 1 and Channel 2

---

---

---